Products

3P Contractor Coil Quick shop

Lovato

3P Contractor Coil

from $184.90

3P Contractor Coil
Lovato

3P Contractor Coil

$184.90

THREE-POLE CONTACTOR, IEC OPERATING CURRENT IE (AC3) = 95A, AC COIL 50/60HZ, 110VAC


View product
3” Rough In Plate Quick shop
3” Rough In Plate
Acuity

3” Rough In Plate

$4.99

View product
4" Square Covers Quick shop

Nesco

4" Square Covers

from $2.75

4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
4" Square Covers
Nesco

4" Square Covers

$2.75

View product
4" Square Poles Quick shop

Hubbell

4" Square Poles

from $1,300.00

4" Square Poles
4" Square Poles
4" Square Poles
4" Square Poles
4" Square Poles
Hubbell

4" Square Poles

$1,300.00

Pole Construction: One-piece non-tapered square shaft of low carbon steel (ASTM-A500, Grade B, 46,000 PSI min. yield) with one flush-welded vertical seam. Shaft is welded to a flat steel anchor base (ASTM-36, 36,000 PSI min. yield).

Base Cover: Base has a two-piece cast aluminum full cover of 319 alloy, secured by stainless steel screws.

Pole Cap: A flush-sided cast aluminum pole cap is provided for side arm mounted luminaires.

Handhole: 18" up from base, with a gasketed cover and ground lug. 2" x 4" handhole provided on poles up to 16'. Reinforced 3" x 6" handhole provided on poles 20' and taller.

Anchor Bolts: Four fully galvanized anchor bolts provided (ASTM-36, 36,000 PSI min. yield), complete with eight galvanized nuts, eight galvanized flat washers, and a presswood template.

Strength: Poles will withstand wind loads as listed in chart (see page 2) when luminaires are mounted per fixture installation instructions.

Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. 5 stage steel pretreatment to include phosphoric acid etch, followed by iron phosphate bath and chromate sealer for corrosion resistance. Standard color Dark Bronze. 

CAUTION: Do not install poles without luminaires or strength guarantee is voided. Any unauthorized accessories secured to pole shall void strength guarantee.

Maintenance: A regularly scheduled maintenance program must be established to insure the protective paint coating is intact, corrosion or structural damage has not occurred, and anchor bolt nuts are tight. Failure to do so could lead to pole collapse and serious personal injury.

Certification: Certified UL 1598 in accordance with Article 410 of ANSI/NFPA 70, National Electrical Code.

 typical 2-3 week lead time 

View product
4" Sulmo LED w/95CRI & Soft Glow Quick shop
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
4" Sulmo LED w/95CRI & Soft Glow
Ovid

4" Sulmo LED w/95CRI & Soft Glow

$49.00 $68.00

HEALTHY LIGHTING- SAY NO TO BLUE LIGHT

A serious step forward in High Definition lighting featuring Soft Glow technology for softer and more natural dimming.  AS FEATURED ON CITYLINE

 

Specs:

The official replacement to the traditional 4" Recessed housings  

Brighter 1100 Lumen package 

3K Soft Glow Technology (dim from 3000K to 1800K)

4K Soft Glow Technology (dim from 4000K to 3000K)

11 Watts

IC, DAMP, WET, RATED

95 CRI for healthy colors 

38 degree optics

COB LED

Insulated & Airtight Rated

CUL Approved

ELV dimming (down to 10%) or TRIAC Dimming (down to 25%)

White Finish

30 degree adjustability with 360 degree rotation  

View product
4-Port Keystone Frame Quick shop
4-Port Keystone Frame
Adorne

4-Port Keystone Frame

$2.62

Enables one keystone insert to be used with adorne wall plate.

View product
400A Main Breaker Push-In Combination Loadcentre Quick shop
400A Main Breaker Push-In Combination Loadcentre
Eaton

400A Main Breaker Push-In Combination Loadcentre

$2,100.00

Combination (main breaker) single or three phase - Type 1 Three-wire, 120/240 Vac combination service entrance Type 1 (indoor)
View product
400A Main Lugs Push-In Combination Loadcentre Quick shop
400A Main Lugs Push-In Combination Loadcentre
Eaton

400A Main Lugs Push-In Combination Loadcentre

$2,100.00

Combination (main lugs) single or three phase - Type 1 Three-wire, 120/240 Vac combination service entrance Type 1 (indoor)
View product
400A Panel Package Promo with Surge Protection Quick shop
400A Panel Package Promo with Surge Protection
400A Panel Package Promo with Surge Protection
400A Panel Package Promo with Surge Protection
Eaton

400A Panel Package Promo with Surge Protection

$2,899.00 $2,900.00

CPM442 Panel Package 
This package features a 400 amp, 42 circuit Eaton panel with 20 breakers (10-BR115, 3-BR220, 1-BR240) 8 -Arc Faults and 1-BR230 SURGE PROTECTOR

Despite the following statistics, surge protection is one of the most overlooked safeguards....when installing a panel for your home or office.

An estimated $250 to $500 million dollars refrigerators with touchscreens, computerized per year is lost from property damage caused washers, dryers, ranges and HVAC equipment, yet by severe weather, lightning, electrostatic discharge, let them operate largely unprotected from surge. switching of inductive or capacitive loads and
internal/external switching transients.*

  • Approximately 60 to 80% of all transient voltage surges are generated from inside a home or building; Only 35% of transient voltage surges stem from
    an outside source.**

  • Analysts estimate U.S. consumers spend billions annually on “smart” home appliances,

• 84% of homeowners feel power strips provide adequate protection for computers, HD TVs and other electronic components. Only 20% of these same homeowners understand that these strips degrade over time, rendering them inadequate for surge protection.***

View product
400A Service Entrance Rated Automatic Transfer Switch Quick shop
400A Service Entrance Rated Automatic Transfer Switch
Kohler

400A Service Entrance Rated Automatic Transfer Switch

$5,500.00

 Kohler is pleased to announce the release of an expanded offering in our service entrance rated residential transfer switches for our Standby Generators! These NEW products add to Kohler comprehensive line of residential transfer switches.  With the electrical contractor and homeowner in mind, Kohler has designed and manufactured an ALL IN ONE solution to meet CEC requirements for complete home Standby Generator backup.

Introducing the industry first 400 amp service entrance rated automatic transfer switch, featuring LED position indicators. Advance load management, and engine start options.

View product
400ATS Service Entrance Power Transfer Switch advanced relay Quick shop
400ATS Service Entrance Power Transfer Switch advanced relay
Briggs & Stratton

400ATS Service Entrance Power Transfer Switch advanced relay

$5,600.00

Features

  • Works with Generac and Briggs Units.
  • The SERIES 300 is listed to UL 1008 standard for total system loadsand CSA standard C22.2 for automatic transfer switches.
  • Meets NFPA 110 for Emergency and Standby Power Systems..​
  • Easy-to-navigate 128x64 graphical LCD display with keypad provides LED indicators for switch position, source availability, not in auto mode, and alert condition.​

Benefits

  • No danger of the SERIES 300 ATS transferring loads to a dead source because the unique ASCO single-solenoid operator derives power to operate from the source to which the load is being transferred.
  • Integrated multilingual user interface for configuration and monitoring.
  • Adjustable time-delay feature prevents switch from being activated due to momentary utility power outages and generator dips

Applications

  • Fire/Alarm/Security
  • Banking, Financial and Insurance
  • Broadcast and Entertainment
  • Construction and
  • Engineering
  • Data Center/Colocation/Hosting
  • Education
  • Government
  • Healthcare
  • Manufacturing
  • Power Generation
  • Power/Gas Transmission and Distribution
  • Retail and
  • Wholesale
  • Telecom
  • Transportation
  • Water Supply/Sewage Disposal
View product
400S LUG SINGLE 400A 4-500MCM Quick shop
400S LUG SINGLE 400A 4-500MCM
Hydel

400S LUG SINGLE 400A 4-500MCM

$20.32

4 – *500

MCM * Nominal Capacity for certain cable type only

View product
417U MAST RACK Quick shop
417U MAST RACK
Hydel

417U MAST RACK

$27.10

400 Amp spool rack - oversize 3" to 4" pipe
View product
444540 Quick shop
444540
444540
444540
Vaughan Electrical Supply

444540

$2,845.00

View product
450319 Quick shop

Vaughan Electrical Supply

450319

$2,235.00 $2,400.00

450319
Vaughan Electrical Supply

450319

$2,235.00 $2,400.00

Pick Up to be advised via courier by customer

1 carton

75 LBS total weight

5' tub x 2' x 1'

View product
Quick shop
Vaughan Electrical Supply

451000 5505

$10,958.00

View product
473381 Quick shop
473381
Vaughan Electrical Supply

473381

$1,173.00

View product
4P Contractor 18A Quick shop
4P Contractor 18A
Lovato

4P Contractor 18A

$76.18

FOUR-POLE CONTACTOR, IEC OPERATING CURRENT ITH (AC1) = 32A, AC COIL 50/60HZ, 24VAC, 4NC


View product
4x4 washer Quick shop
4x4 washer
Hydel

4x4 washer

$7.00

RC736
View product
5" and 6" E Series LED Module Retrofit Quick shop
5" and 6" E Series LED Module Retrofit
5" and 6" E Series LED Module Retrofit
5" and 6" E Series LED Module Retrofit
5" and 6" E Series LED Module Retrofit
Acuity

5" and 6" E Series LED Module Retrofit

$25.00

The E Series LED Recessed Module gives you optimized value and performance you can trust. The E Series combines dependable performance and low cost with the virtually maintenance-free, energy-saving benefits of a 50,000 hour rated-life LED. Ideal for both retrofitting and new construction in a variety of residential and light commercial settings such as multifamily residences, retail shops and offices.

The E Series model fits both 5 inch and 6 inch recessed can-style housings using the adjustable torsion springs and can replace a 65W incandescent lamp.

Matte White Finish.

View product