PHPM-PA-120WH

Provides dimming control for 1 zone of a full 16 A lighting load.

• May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode. • Phase-adaptive technology automatically selects leading edge or trailing-edge dimming for low-voltage transformers.

• Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).

• Use PHPM-WBX- models for 3-wire fluorescent dimmer input and PHPM-PA- models for 2-wire input.

• PHPM-WBX- models can be used in conjunction with BCI-0-10 for 0–10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com

• Models available for control voltage of 120 V~ only or 220–277 V~.

• Models available for load voltage of 120 V~ only or 120–277 V~. 

• Not for use with non-dim loads. Works with 120 V~ or 220–277 V~ versions of:

• Lutron in-wall neutral wire dimmers; see approved list in the Dimmers and Switches Specification Guide (Lutron P/N 3671746) at www.lutron.com (see Lighting Load Interfaces section)

• GRAFIK Eye QS control units *

• LP, LCP, and GP dimming panels **

• HomeWorks QS remote power panels **

• HomeWorks QS in-line dimmer

• HomeWorks QS DIN-rail power modules • EcoSystem interface C5-BMJ-XXX†

• Energi Savr Node PRO LED+ phase-adaptive fixture controller

• RadioRA 2 neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369225) at www.lutron.com

• HomeWorks QS neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369305) at www.lutron.com

• Caséta Wireless neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369987) at