LED Landscape Lighting

12/2 Low Voltage Landscape Wire Quick shop
12/2 Low Voltage Landscape Wire
in-lite

12/2 Low Voltage Landscape Wire

$139.00 $159.00

12/2 Landscape x 75M (250') designed for the in-lite and Hadco landscape lighting connectors.
View product
56W IN LITE Quick shop

in-lite

56W IN LITE

$110.00 $129.00

56W IN LITE
in-lite

56W IN LITE

$110.00 $129.00

56 W

12V ideal for landscape lighting 

View product
ACE DOWN Quick shop

in-lite

ACE DOWN

$129.00 $139.00

ACE DOWN
ACE DOWN
ACE DOWN
in-lite

ACE DOWN

$129.00 $139.00

The ACE DOWN wall-mounted light fixture produces a targeted beam of light and can be mounted on a wall or fence. Since the LED light source is placed deep inside the fixture, the light is not blinding. The ACE DOWN is available in two colors: Rosé Silver and Dark Gray.
View product
BIG SCOPE Quick shop

in-lite

BIG SCOPE

$149.00 $189.00

BIG SCOPE
in-lite

BIG SCOPE

$149.00 $189.00

High Power 7 WATT LED

Spotlight in charcoal grey coated aluminium finished with a stylish anodised aluminium ring. Provides an atmospheric beam of light. Ground stake included, base plate available separately. The SCOPE and BIG SCOPE shine equally far. However, the beam of light of the BIG SCOPE is twice as wide.

Dimensions Ø 65 mm (2.4 inches)
Material Aluminium housing / glass lens
Colour Charcoal grey
Power 12V/7W
Light reach 5 metres (16.4 feet)
Use Accent lighting for special features in the garden such as trees, shrubs, statues and exterior walls.
Installation

Mounting in soft surfaces with supplied ground stake or on hard surface with the separately-available base plate.

 

5 Year Warranty

Connector Included

View product
BL9 LED Landscape Quick shop

Hadco

BL9 LED Landscape

$119.00 $159.00

BL9 LED Landscape
BL9 LED Landscape
BL9 LED Landscape
BL9 LED Landscape
BL9 LED Landscape
Hadco

BL9 LED Landscape

$119.00 $159.00

The all-in-one solution for landscape lighting

Philips Hadco FlexScape LED accent luminaire BL9 brings landscape lighting to the next level. Designed for optimal LED performance, it provides the lighting professional with countless low-voltage options. The luminaire’s rugged die-cast aluminum housing features low-energy outdoor lighting. Convenient beam adjustability makes for easy on-site lighting effect changes. The lockable aiming is well- suited for accenting objects, textures, walls, trees, etc. This all-weather luminaire comes with 100% molded silicone gaskets.

One fixture. Multiple light levels and beam patterns.

Every FlexScape luminaire provides countless lighting outcomes to choose from. As a result, you’ll also enjoy better flexibility in the field, meaning easy adjustments during installation or down the road, should the landscape or lighting needs change. In addition, its LUXEON LED technology ensures outstanding energy savings and service life.

Features

• Efficacy1: 56lm/w to 88lm/w

• CCT: 3000K 
• CRI: 70 min.
• Lumens
1: 112lm to 710lm

• Wattage: 12W (max)
• Voltage: 12V low voltage 

• 50,000 hour rated life (L70)
• 5-year limited warranty

View product
BLINK Quick shop

in-lite

BLINK

$99.00

BLINK
in-lite

BLINK

$99.00

Round wall-mounted fixture in warm silver-coated aluminum. Comes with two lenses: transparent and matte. For a focused or, indeed, dispersed Warm White light.

12V- Low Voltage

LED

Rose Silver

View product
BLINK BRONZE Quick shop
BLINK BRONZE
in-lite

BLINK BRONZE

$99.00

Round wall-mounted fixture in new bronze aluminum. Comes with two lenses: transparent and matte. For a focused or, indeed, dispersed Warm White light.

12V- Low Voltage

2W LED

Bronze Finish

View product
Concrete Kit for HYVE Lights Quick shop
Concrete Kit for HYVE Lights
Concrete Kit for HYVE Lights
Concrete Kit for HYVE Lights
Concrete Kit for HYVE Lights
Concrete Kit for HYVE Lights
Concrete Kit for HYVE Lights
in-lite

Concrete Kit for HYVE Lights

$470.00 $578.00

This conveninet kit includes 20' of 2 1/2" PVC Pipe, 320' of 1/2 flexible core-line, 250' of 12/2 Landscape Wire, a 56W transformer and the HYVE light with oversize ring for contractor to visualize product.

Simply cut PVC pipe every 12-14" in lengths and rough in for every light/HYVE product you plan on installing throughout your concrete area.   

Next from your low voltage transformer run core-line to first cut pipe placed in light location, cut core-line and place under cut pipe location.  

Next run new core-line from under same pipe as per above and run to the next cut pipe which is the next light location.  Continue this till you reach your final light location.

Once core-line runs are roughed in, now you can run your landscape wire.  Push wire in from transformer location and follow core-line.  Landscape wire is ran throughout each pipe location running continuously in every core-line to final light location.   Be sure to pull lots of extra wire at the end as in the next step we will go though the step of leaving extra wire in each pipe.

Once wire is ran throughout, now go to each pipe starting from the last and first and pull back extra wire so each pipe has at least 18" of looped wire inside so later on there is enough to connect the lights in every pipe.

Once given enough slack of wire in each pipe, again 18" of looped wire suggested in each pipe.  Now you can fasten the pipe to the rebar and place duct tape over and under the pipe to ensure no concrete is poured into the pipe.  Remember the lights and wire need to fit in the cut pipe locations so duct tape will ensure concrete does not enter.

Concrete is poured and dried, great now is the fun part!  

Pipe may be lower or higher then the concrete and thats okay.  If pipe is higher than the poured concrete simply peel back the top portion of the duct tape and cut back the pipe so its flush with the concrete ensuring not to cut the wire!

If pipe is lower, its okay the light sits on the concrete so its ready for light install.

Connecting and installing the HYVE light.  The HYVE (purchased separately) as kits only comes with one.

The HYVE light comes with a speciality connector, simply peel pack the duct tape as per above step if not done already, grab your slack of wire and connect the wire to the connector.  Once connected attached light to connector.  Place oversize ring (sold separately) to light by unscrewing existing ring making it a oversize ring which ensurs no concrete mistakes or pipe is exposed when installing light.  

Final step, place small portion of silicon under ring and place light in pipe, pushing in the wire, connector and light so it fits all in the pipe.

Power on transformer to test lights, if any lights are not on, check connection on wire for that light and ensure the connector was tightened and not loosened when pushing light in. 

View product
FlexScape (Inground IL9) Quick shop
FlexScape (Inground IL9)
Hadco

FlexScape (Inground IL9)

$190.00 $210.00

Philips Hadco FlexScape 12W LED inground luminaire IL9 opens new horizons for low-voltage landscape lighting. It is designed for optimal LED performance and superior flexibility. The luminaire creates visual interest for pathways, walls, columns and foliage. Its rugged housing installs directly into the soil. In addition to low-energy outdoor lighting, it features convenient on-site beam adjustability. This allweather luminaire comes with 100% molded silicone gaskets.
View product
FLUX Quick shop

in-lite

FLUX

$99.00

FLUX
FLUX
FLUX
in-lite

FLUX

$99.00

Renewed for the 2015 season! The FLUX 60 LED ground spot is finished with a stylish stainless steel ring and emits a beam of Warm White light. Because the ring rests on the surface it is also easy to embed this ground spot into wood, for example. For illuminating special features in the yard such as trees, shrubs, statues and exterior walls. 

Stainless Steel Ring

2 Watt

12V- Low Voltage

Integrated accent lighting for special features in the yard such as shrubs, statues and exterior walls.

View product
Hadco 152 Watt LED Transformer with Photocell Quick shop
Hadco 152 Watt LED Transformer with Photocell
Hadco

Hadco 152 Watt LED Transformer with Photocell

$199.00 $229.00

Housing and cover are polyester powdercoated steel with removable door. Two (2) 1/2" conduit knockouts on each side. Internal transformer is epoxy encapsulated. Exterior Rated.

Mounting - Transformer should be mounted on the wall, structure, or post in the vertical position. Cable entries should be positioned downward.

Low Voltage, LED compatible landscape transformer, ten year warranty, wet location.

Built in timer & Photocell controls. 

View product
HYVE Quick shop

in-lite

HYVE

$99.00 $109.00

HYVE
HYVE
HYVE
in-lite

HYVE

$99.00 $109.00

Subtle round fixture finished with a wide stainless steel ring. The lens honeycomb structure creates warm atmospheric lightning.

12V- Low Voltage

1W LED

Stainless Steel

View product
HYVE 22 CW Complete Package Quick shop
HYVE 22 CW Complete Package
HYVE 22 CW Complete Package
HYVE 22 CW Complete Package
HYVE 22 CW Complete Package
Vaughan Elec & Co

HYVE 22 CW Complete Package

$899.00 $984.00

20 PCS- HYVE 22 CW

Good things come in small packages: the NEW HYVE 22 fixture. This subtle fixture with a diameter of 22 mm is virtually invisible during the day. In the evening, it produces an attractive warm light image thanks to the lens with honeycomb structure. The HYVE 22 is suitable for stairs and terraces , for example. Also available with a stainless steel ring.

PRODUCT DETAILS

Dimensions: 
Ø 22 mm, overall height 50 mm
Material: 
Impact-resistant polycarbonate, filled with a two-component resin
Light source: 
LED
Lighting intensity: 
Small
Voltage: 
12V
Capacity: 
0.25W
Light reach: 
0.5 (2 ft)

USE: 

Concrete Natural stone Wood
Lawn Drive-over

 

1- 56 Watt 

56 Watt transformer with manual on/off, motion detector and timer features. Usable outdoors.

 SPECIFICATIONS

Dimensions 185 x 125 x 85 mm (7.3 x 4.9 x 3.3 inches)
Power 12 V / 56 W
Installation Mount the transformer vertically, at least 50 centimetres (20 inches) above the ground and in the direct vicinity of a 100-240 Volt socket. Mounting material included. 

Kit includes low voltage cable type 12/2; 12 volt double-cored. Is available as a 75-meter beam and comes complete with cable sleeves and final insulation. Maximum load 250 watt, maximum cable length (laid linearly) 75 meters.

PRODUCT DETAILS

Voltage: 
12V
View product
HYVE 22 RVS Warm White Quick shop
HYVE 22 RVS Warm White
HYVE 22 RVS Warm White
HYVE 22 RVS Warm White
in-lite

HYVE 22 RVS Warm White

$45.00

This subtle fixture with a diameter of 22 mm is fitted with a stainless steel ring. In the evening, it produces an attractive warm light that, thanks to the lens with honeycomb structure, does not blind. This makes this fixture suitable for stairs and terraces, for example. The HYVE 22 with stainless steel goes together well with the other fixtures in the HYVE line.

PRODUCT DETAILS

Dimensions: 
Ø 22 mm, ring Ø 28 mm, overall height 55 mm
Material: 
Impact-resistant polycarbonate, filled with a two-component resin, stainless steel ring
Color: 
Silver stainless steel
Light source: 
LED
Lighting intensity: 
Small
Voltage: 
12V
Capacity: 
0.25W
Light reach: 
0.5 (2 ft)

USE: 

Concrete Natural stone Wood
Lawn Drive-over
View product
HYVE Accessory Bronze Ring Quick shop
HYVE Accessory Bronze Ring
in-lite

HYVE Accessory Bronze Ring

$16.00

Add on ring to the HYVE from in-lite
View product