



ASCEND SMART 7-DAY PROGRAMMABLE WI-FI & Non Wifi TIMER, 120 VAC, 15A, WHITE
$68.00
$68.00
$89.00
The Lithonia Lighting® ESXF LED floodlight is a general-purpose flood that offers a wide selection of options and flexibility.
The ESXF is an all-in-one flood that gives ultimate versatility by offering 36 configurations in one product while delivering on superior illumination and offers easy access to controls for color switching, lumen switching and selectable photocell. Available in four sizes, ESXF comes with the two most common mountings already included in the box, making on-the-spot reconfiguring quick and easy. No more go-backs!
The ESXF family has four sizes with lumen packages ranging from 1,500 to 20,000 lumens and are designed to replace 150W to 500W Quartz or 75W to 400W HID floodlights. Suitable for both professionals and DIYers, these floodlights offer a wide flood distribution (7x7) and DLC Premium performance, making it a one-stop-shop for all floodlighting needs.
Switchable Color Temperature
Each ESXF includes three switchable color temperatures to give you the illumination requirements specific to the job.
$75.00 $110.00
The HomeGuard LED family of residential security lights, with rugged die cast aluminum construction, are long-lasting, energy-efficient solutions for replacing incandescent PAR lamp fixtures. Mounted on the wall or under the eaves, these luminaries provide reliable security lighting in residential and commercial applications.
HomeGuard LED security lights are available with the right feature sets for every application; ranging from a low-cost version for switched circuit applications all the way to a fully-featured product that includes an integral photocell for automatic dusk-to-dawn lighting, color-switching, lumen switching, and motion sensor options. With tool-less easy-aim lamps, fast installation, and delivering a lumen range from 1,700 to 4,100 lumens, the HomeGuard LED security light family is easy-to-install and experience, making it the best choice for contractors and DIY customers alike.
$24.00
$135.00
3CCT AND 3 POWER SELECTABLE OR SINGLE POWER WITH INTEGRATED PHOTOCELL
This wall pack series has the classic and familiar design but with a new and updated slimmer profile. All configurations come with an integrated photocell, selectable power and color temperature, as well as with modern LED technology to promote better energy efficiency and long life. This series is best suited for entrances, underpasses or anywhere controlled security lighting is required and is a great addition to any commercial or industrial outdoor wall mount application
Larger Available:
TWR2 - Adjustable lumens from 3,050 to 11,800 lumens (21W to 87W)
$75.00
$65.00
These high power flood and area lights are designed to ease the installation with the slide-on feature and to facilitate the interchangeability of the optic to suits different applications. The color temperature and the power can be changed on site with the help of switches located on the underside of the fixture. For energy savings and enhanced safety, this product series with a 7 pin photocell receptacle for the ability to add a dusk till dawn photocell and includes a sensor adapter compatible with both smart and non-smart sensors. This series also offers DarkSky approved configurations to help minimize the light pollution.
The FLL series is great for general lighting of grounds, storage yards, car dealerships, parking areas as well as flood lighting of signs and building facades.
$200.00
Steel Bracket, Side Tenon, Single, 10" Length, 4" Square Pole Black
$950.00
Gardco EcoForm Gen-2 combines economy with performance in an LED area luminaire. Capable of delivering up to 27,800 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings.
$195.00
$1,300.00
Pole Construction: One-piece non-tapered square shaft of low carbon steel (ASTM-A500, Grade B, 46,000 PSI min. yield) with one flush-welded vertical seam. Shaft is welded to a flat steel anchor base (ASTM-36, 36,000 PSI min. yield).
Base Cover: Base has a two-piece cast aluminum full cover of 319 alloy, secured by stainless steel screws.
Pole Cap: A flush-sided cast aluminum pole cap is provided for side arm mounted luminaires.
Handhole: 18" up from base, with a gasketed cover and ground lug. 2" x 4" handhole provided on poles up to 16'. Reinforced 3" x 6" handhole provided on poles 20' and taller.
Anchor Bolts: Four fully galvanized anchor bolts provided (ASTM-36, 36,000 PSI min. yield), complete with eight galvanized nuts, eight galvanized flat washers, and a presswood template.
Strength: Poles will withstand wind loads as listed in chart (see page 2) when luminaires are mounted per fixture installation instructions.
Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. 5 stage steel pretreatment to include phosphoric acid etch, followed by iron phosphate bath and chromate sealer for corrosion resistance. Standard color Dark Bronze.
CAUTION: Do not install poles without luminaires or strength guarantee is voided. Any unauthorized accessories secured to pole shall void strength guarantee.
Maintenance: A regularly scheduled maintenance program must be established to insure the protective paint coating is intact, corrosion or structural damage has not occurred, and anchor bolt nuts are tight. Failure to do so could lead to pole collapse and serious personal injury.
Certification: Certified UL 1598 in accordance with Article 410 of ANSI/NFPA 70, National Electrical Code.
typical 2-3 week lead time
$150.00 $499.00
Provides safety and security in residential and commercial applications in locations such as entrances, over garages, wall signs and locattions along perimeters and pathways.
• Patented Philips LED Optical System individually controls the placement of light in the target area.
• Type III distribution with shielded optics collects and redirects light to optimize performance.
• 4000K neutral color temperature delivers maximum light with high efficiency.
Voltage: 120V
• Functions in environments with temperatures that range from -30oC to 40oC
Replaces 250W traditional MH wall pack
LP32 - 5800 Delivered Lumens, utilizing only 77 watts.
Replaces 150W traditional MH wall pack
LP16 - 2500 Delivered Lumens, utilizing only 37 watts.
Replaces 70W traditional HPS wall pack
LP7 - 555 Delivered Lumens, utilizing only 13 watts.
$85.00
BFL
LED BULLET FLOOD LIGHT WITH SELECTABLE BEAM ANGLE
3 CCT and 3 Power Selectable
Integrated Photocell
The BFL Series is a flexible flood light designed to adjust luminous flux, color temperature, and beam angle to optimize performance for various applications. It also features a photocell for enhanced energy efficiency. This luminaire is typically used for commercial landscaping applications as well as flood lighting of signs and facades.
$125.00
Uplight/Downlight LED Wall Sconce with 5 CCT Selectable
indoor and outdoor applications
Set the tone and accentuate the overall visual appeal with BENTO. This luminaire is a versatile addition to any lighting scheme as it creates focal points with directional lighting, increases functionality, and adds a decorative touch to both indoor and outdoor applications. Simply adjust the beam angles and select the color temperature to create the perfect lighting environment. Second to none, BENTO is the perfect lighting solution to add depth to any space and create an inviting atmosphere.
$35.00
$149.00
The WCY is a highly efficient and versatile decorative LED wall cylinder designed to provide any commercial building with security and accent lighting. This fixture allows the direction of the light to be field adjustable to offer uplight, downlight or uplight/downlight lighting. It comes with a 20 degree beam angle and can be easily changed to a 40 degree or 80 degree angle with the optics included with the fixture. Additionally these luminaires offer the ability to adjust the color temperature and control the functionality of the photocell that comes standard in all fixtures making it a great all-in-one solution.
Performance data − Selectable color temperature 3 000/4 000/5 000 K
default programming at 4 000 K − 80+ CRI − Electrical ratings: 120-347 V − Estimated life of over 50 000 hours to L70 − Dimmable 0-10V − 4 kV surge protection − Operating temperature: -40 °C to 40 °C (-40 °F to 104 °F)
$55.00
Order Code: | 68988 |
Previous Generation: | 68312 |
International Article Number (EAN/UPC): | 69549023130 |
Description: | WCI-LS2B-W-3C-BR-P |
LED Wall Packs 20W 2560-2921LM 120-277V 3000K/4000/5000K |
Colour Rendering Index (CRI): | 80 |
Volts (V): | 120-277 |
Colour Temperature (K): | 3 000/4 000/5 000 |
DLC: | Yes |
Environment: | Wet |
Lumens: | 2560 |
IP Rating: | 65 |
Housing Finish: | Bronze |
Photocell: | Yes |
Life (Hours): | 54000 |
Lumens Per Watt: | 135 |
Warranty (yrs): | 5 |
Watts (W): | 20 |
$95.00
Order Code: | 68722 |
Previous Generation: | 65570 |
International Article Number (EAN/UPC): | 69549018730 |
Description: | WPA-LS1B-W-3C-BR-P 120-277V 2262LM 3C WP |
WPA-LS1B-W-3C-BR-P 120-277V 2262LM 3000/4000/5000K BRONZE WALL PACK |
Colour Rendering Index (CRI): | 70 |
Volts (V): | 120-277 |
Wallpack Type: | Wall Pack Square |
Colour Temperature (K): | 3 000/4 000/5 000 |
DLC: | Yes |
Environment: | Wet |
Lumens: | 2261 |
IP Rating: | 65 |
Housing Finish: | Bronze |
Photocell: | Yes |
Lumens Per Watt: | 113 |
Warranty (yrs): | 5 |
Watts (W): | 20 |