• Overhead/Underground • Tunnel lug kit supplied for overhead service LK250, LK500, LK750 upon request • Line side - double 1/2" studs to accommodate compression lugs for underground service (1 x 500 MCM or 2 x 250 MCM) Load side - one #4 - 600 MCM or two 1/0 - 250 MCM tunnel type connectors Neutral - 1/2" studs to accept two 500 MCM compression type lugs - lugs, one#4 - 600 MCM or two 1/0 - 250 MCM • Dimensions, 30" x 20" x 8" or 36" x 20" x 8" Weight, 75 lbs. or 80 lbs. Ko's 3" - 31/2", 4" • CSA approved

JS4A

TCC5

TSU

CSA enclosure 3R • Barrel type connectors angled at 45° • Conductor range No. 6 -250 MCM CU/AL • Lay-in neutral (can be used with unbroken neutral wire)

SUB LM2

J22

BS2-TCV

BQ2

CSA enclosure 3R • Conductor range load size No. 6 - 250 MCM CU/AL • 1/2" line studs provided for compression type wire connectors • For underground use only

CLX = MSC400TW

MO2-V

100 AMP - 7 JAW Polyphase 3 PH - 4 Wire

SFC Series

PL17INTCV

ONTARIO 25516GK Mast Guying Kit 7 lbs. Contents in one carton: 1-2515 Mast guy clamp 2-516GT Guy thimbles 1-2514GE Guy grip 1-20 ft. Coil of 1/4" guy wire 1-212GU Guy clamp 1-1258BTE 5/8 x 12 Bent thimble c/w washer

Mast clamp

2516 with hole for bolt

2516-L with lag bolts 

SXC125 clamp 1-1/4"

SXC200 clamp 2" 

Hydel SXK503 - 5th Jaw @ 9 O'clock - For All 100 Amp & 200 Amp JA, EK, SLC, E, SE, SH, SD Meter Sockets

225AMP

These blocks are used in our standard splitters. They can be used for tapping branch circuits off feeders. All blocks are rated 600V.

Hubs for 21/2" Hub Opening

SXK503MJ : 5th Jaw in 9 O'clock, 14 - 1 /0
Used on all 100 Amp and 200 Amp Sockets

200 Amp, 600 VOLT • CSA enclosure 3R • CSA approved for copper or aluminum • Conductor range #6 -250 MCM CU/AL

- For overhead installations order HD hubs separately - Field adapted insulated neutral INK200

PL27 Type