• Built-in KILLFLASH
• Patented waterproof connection
• Modular design allowing up to three light sources

• Available in two heights: 24" and 39"
• Equipped with in-lite Breathe technology
• Contains the latest COB LED strip

Introducing the latest and smartest landscape transformer from in-lite. 

SMART HUB-300

Innovation is part of our DNA. With the SMART HUB-150, we’re introducing a revolutionary new way to control your

in-lite outdoor lighting using the in-lite app. Want to know how it works? Watch the video.

in-lite app

Key features:

300 Watts

3 Zones 

Up to 250’ per zone 

Combined the zones carries up to 150W, therefore Zone 1 can be 100 Watts, Zone 2 can be 20 Watts & Zone 3 would be 30 Watts. 

App based

Bluetooth based with mesh network capability, ie linking 3 transformers on one app. 

Create schedules 

Astronomic time clock for accurate schedules and on/ off capabilities for your location. 

• Individually dimmable
• Automatic detection and synchronisation
• Perfect light quality

REQUIRES SMART HUB 150

Outdoor Ground Box 2-Gang, 20A Duplex Receptacles, Gray

The black Outdoor Ground Box cover assembly is prewired on a single circuit with (2) 20A weather resistant duplex receptacles. CAUTION: All ground box electrical circuits must be protected by a Ground Fault Circuit Interrupter upstream from the ground box.NOTE: Cover must be closed while in use. Use only molded plug and cord assemblies that are rated for outdoor use.NOTE: Maximum length of plug allowed at end of cord is 3'' (76mm).

Charging Station with Area Light, 2-Gang, 1 Duplex GFCI Receptacle and 1 4-Port USB Outlet

Charging Station with Area Light is a charging station with an LED light to eliminate the need for a stand-alone bollard. Perfect for use as pathway lighting in educational, corporate and residential applications.

Peerless NT752 Neptune 75" Smart 4K UHD LCD TV

The Neptune™ Shade Series Outdoor TV is an all-season solution for outdoor entertainment and living. This outdoor TV is all weather rated, maintenance-free and has an operating temperature range of -22°F - 122°F (-30°C - 50°C). With 4K resolution and an IPS panel, Neptune meets the full UHD specifications, providing exceptional color and video quality from any viewing angle. The input compartment and built-in IR repeater provide safe storage and IR control for small video equipment. Whether you want an outdoor TV on your backyard patio or under the gazebo, quality outdoor entertainment is now a reality with Neptune.  INCLUDES:Peerless-Av Wall Mount For Flat Panel Display, TV - Black

Kef Soundbar

Today’s sleek flat panel televisions demand an audio solution that not only complements their stylish good looks but also faithfully reproduces the detailed high definition audio from today’s movie soundtracks. The solution is the KEF HTF8003 soundbar - an excellent combination of incredible audio performance and stylish good looks.

One x 8 Zone Multi Room Streamer

Clear, powerful sound to 8 zones (16 channels)

Amplification: class D-amplifier outputs 40 watts a channel of high quality audio

Streaming:  4 embedded wireless inputs for simple streaming from phone/tablet to any combination of rooms

3 Pairs of NUVO Series Four 6.5"" In-Ceiling Recessed Speakers

The NV-4IC6-DVC utilizes two Aluminum tweeters and a 6.5"" dual voice coil Glass Fiber Woofer. This speaker offers a super clean look, and is finished beautifully with their completely rimless, magnetic grills. They also offer quick and secure installation by utilizing three dog legs, instead of the usual four, and includes a unique tweeter bridge that maximizes sound quality, looks great, and serves as a handle to hold the speaker by during installation.  Includes speaker brackets for rough in.

One Pair of Series Six 6.5"" Outdoor Surface Speaker, Black

Fill your outdoor space with crystal-clear, powerful audio using the Nuvo Series Six 6.5"" Outdoor Speaker. Offering the highest power handling and performance, this speaker is designed with a 6.5"" combination carbon fiber/Kevlar woofer and a 1"" titanium tweeter for the ultimate listening experience. The sleek enclosure boasts a modern form and minimal size that tastefully blend with the lines of any home.Optimized for the demands of outdoor installations, the Outdoor Speakers are IP65 and MIL-STD- 810 rated. Designed for easy installation, the speaker safely rests on the bracket with mounting knobs loosely installed to allow flexibility while wiring the removable phoenix connector. After the terminal has been secured, simply adjust the angle, tighten knobs, install covers, and mounting is complete.

This starter rough in kit includes (20) pre cut sleeves of 2 1/2" x 14" with shaved sleeve so no wider ring on the Hyve is required, meaning a sleeker look! It also includes (300') of 3/4” flexible core-line pending on availability, (500') of 12/2 Landscape Wire, a (1) 100W transformer, (40) 3/4” coreline connectors, (40) 3/4” coreline couplings, (2) roll of duct tape and (20) Hyve (ww) lights to test and rough in during install, with your option to add more lights! 

Simply place pre cut sleeves for every light/HYVE product you plan on installing throughout your concrete area.   

Next from your low voltage transformer run core-line to first sleeve  placed in light location, cut core-line and place under cut pipe location or cut out two 1” holes to place connectors and fasten coreline for a secure placement. 

Next run new core-line from sleeve as per above and run to the next sleeve which is the next light location.  Continue this till you reach your final light location.

Once core-line runs are roughed in, now you can run your landscape wire.  Push wire in from transformer location and follow core-line.  Landscape wire is ran throughout each pipe location running continuously in every core-line to final light location.   Be sure to pull lots of extra wire at the end as in the next step we will go though the step of leaving extra wire (looped) in each sleeve.

Once wire is ran throughout, now go to each sleeve starting from the last and first and pull back extra wire so each pipe has at least 18" of looped wire inside so later on there is enough to connect the lights in every sleeve.

Once given enough slack of wire in each pipe, again 14" of looped wire suggested in each pipe.  Now you can fasten the sleeves to the rebar and place duct tape over and under the pipe to ensure no concrete is poured into the pipe.  Remember the lights and wire need to fit in the cut pipe locations so duct tape will ensure concrete does not enter.

Concrete is poured and dried, great now is the fun part!  

Sleeves may be lower or higher then the concrete and thats okay.  If pipe is higher than the poured concrete simply peel back the top portion of the duct tape and cut back the sleeve so its flush with the concrete ensuring not to cut the wire!

If sleeve is lower, its okay the light (hyve) sits on the concrete so its ready for light install.

Connecting and installing the HYVE lights.  The kit comes with (20) HYVE (ww) light.

The HYVE light comes with a speciality connector, simply peel pack the duct tape as per above step if not done already, grab your slack of wire and connect the wire to the connector.  Once connected attached light to connector.  

Final step, place small portion of silicon under ring and place light in sleeve, pushing in the wire, connector and light so it fits all in the pipe.

Power on transformer to test lights, if any lights are not on, check connection on wire for that light and ensure the connector was tightened and not loosened when pushing light in. 

• At a height of 35 cm, the DISC LOW is perfect for creating ambiance in borders and for use as indication lighting along paths
• Made of aluminum with high-quality FCBV coating in the color Black
• Easy to install in soil, grass or gravel using a ground pin

DISC

• At a height of 60 cm, the DISC is perfect for creating ambiance in borders and for use as indication lighting along paths
• Made of aluminum with high-quality FCBV coating in the color Black
• Easy to install in soil, grass or gravel using a ground pin

Remote access via Smart Hub 150

• With one press of a button via the app or a voice message, you can now easily switch on your outdoor lighting from anywhere in the world.
• Voice Control via Google Home, Apple Homekit or Amazon Alexa.
• SMART BRIDGE is fully automatic. Need an update? No problem. You can easily update the SMART HUB firmware through a fixed internet connection.

• For easy placement of ground spots between paving and gravel
• Suitable for BIG FLUX series and LUNA
• Easy to assemble and disassemble

• Produces a wide, focused light at an angle
• Designed for illuminating yards, walls and espaliers
• Drive-over

HALO 12V

• Produces a focused downward light
• Designed for illuminating a fence or wall
• Lighting effect can be adjusted with several accessories

• ACE 
  

  The ACE bollard provides a soft light that can be used to illuminate a path or driveway.

  • Produces an attractive soft light
  • Designed for illuminating a driveway or walkway
  • Tilting light source

  Installation advice:

  Every 2 to 3 meters an ACE

• Produces a strong and focused light
• Designed for illuminating tall elements up to 8 meters
• Installable in any surface

• Produces a subtle radiating light on all sides
• Designed for illuminating the edges of a driveway, walkway or deck
• Drive-over

• Produces a soft light that does not glare
• Designed for illuminating a walkway or deck
• Drive-over
• 22mm diameter 

• Produces a strong and focused light
• Designed for illuminating tall elements up to 5 meters
• Drive-over

• Maximum installation value of 100 VA (100Watts)
  
• Fitted with a touchscreen, 2 cable outlets and a light sensor
• Expandable with motion detector

Mini Wedge

• Produces a subtle and attractive downward light
• Designed for illuminating a low fence or wall
• Available in three sizes

• Produces a wide, attractive light
• Designed for illuminating a pergola or overhang
• Available in two sizes

• Produces an attractive light
• Designed for illuminating a pergola or overhang
• Available in two sizes

• Produces a soft light that does not glare
• Designed for illuminating a walkway or deck
• Drive-over

• Produces a focused light
• Designed for illuminating trees up to 8 meters
• Height adjustable with accessories

CC2

Cable connector to connect two 12 volt low-voltage cables in a split cable plan. Filled with moisture-resistant gel. Maximum load 50 Watts.

Splitter

The SPLITTER allows one light sensor to be connected to several transformers and to switch on the entire lighting plan at the same time. A SPLITTER can also be used to connect several lights to one Easy-Lock.

This small spotlight is delivered with a bracket and ground stake. This makes the fixture suitable for mounting on, for example, a fence or in an overhang, and to illuminate plants and shrubs in the border.