With a classic up-and-down motion, the adorne Paddle Switch lets you turn lights on and off with ease.  Magnesium

With a classic up-and-down motion, the adorne Paddle Switch lets you turn lights on and off with ease.

The adorne 1-Gang Wall Plate is perfectly sized to fit two Half-Size USB Outlets, a single Pop-Out or Standard Outlet, and any adorne Switch or Dimmer Switch.

The adorne 2-Gang Wall Plate is perfectly sized to fit any two adorne Switches, Outlets or Dimmers.

The adorne 3-Gang Wall Plate is perfectly sized to fit any three adorne Switches, Outlets or Dimmers.

The adorne 4-Gang Wall Plate is perfectly sized to fit any four adorne Switches, Outlets or Dimmers.

The adorne 5-Gang Wall Plate is perfectly sized to fit any five adorne Switches, Outlets or Dimmers.

The adorne 6-Gang Wall Plate is perfectly sized to fit any six adorne Switches, Outlets or Dimmers.

Eaton’s Pow-R-Line panelboards (1a & 2a) provide ideal solutions for lighting and appliance branch circuit protection. Standard designs offer a wide selection and allow for easy installation. Increased series ratings provide higher short circuit ratings using standard bolt-on or plug-on breakers. UL listed kits can provide field conversion from main lugs to main circuit breaker.

(BREAKERS NOT INCLUDED)

Eaton’s Pow-R-Line panelboards (2a) provide ideal solutions for lighting and appliance branch circuit protection. Standard designs offer a wide selection and allow for easy installation. Increased series ratings provide higher short circuit ratings using standard bolt-on or plug-on breakers. UL listed kits can provide field conversion from main lugs to main circuit breaker.

(BREAKERS NOT INCLUDED)

Eaton’s Pow-R-Line panelboards (1a & 2a) provide ideal solutions for lighting and appliance branch circuit protection. Standard designs offer a wide selection and allow for easy installation. Increased series ratings provide higher short circuit ratings using standard bolt-on or plug-on breakers. UL listed kits can provide field conversion from main lugs to main circuit breaker.

(BREAKERS NOT INCLUDED)

Eaton’s Pow-R-Line panelboards provide ideal solutions for lighting and appliance branch circuit protection. Standard designs offer a wide selection and allow for easy installation. Increased series ratings provide higher short circuit ratings using standard bolt-on or plug-on breakers. UL listed kits can provide field conversion from main lugs to main circuit breaker.

(BREAKERS NOT INCLUDED)

Eaton’s Pow-R-Line panelboards (1a & 2a) provide ideal solutions for lighting and appliance branch circuit protection. Standard designs offer a wide selection and allow for easy installation. Increased series ratings provide higher short circuit ratings using standard bolt-on or plug-on breakers. UL listed kits can provide field conversion from main lugs to main circuit breaker.

PrL2x 400A MB 72cct max feeder breaker size GBH 3p 100A

(MAIN BREAKER INCLUDED)

panel with the branch breakers 

sub 400amp to 200amp

alum bus

1HD327N HD 800A 3P 120/208V FUSE TYPE 1 /W NEUTR  - 5351.00

Prl1x 225A 120/308V MLO Al bus 30 cct – 702.00

Prl1x 225A 120/308V MLO Al bus 60 cct – 983.00

Direct burial 

PHPM-PA-120WH

Provides dimming control for 1 zone of a full 16 A lighting load.

• May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode. • Phase-adaptive technology automatically selects leading edge or trailing-edge dimming for low-voltage transformers.

• Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).

• Use PHPM-WBX- models for 3-wire fluorescent dimmer input and PHPM-PA- models for 2-wire input.

• PHPM-WBX- models can be used in conjunction with BCI-0-10 for 0–10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com

• Models available for control voltage of 120 V~ only or 220–277 V~.

• Models available for load voltage of 120 V~ only or 120–277 V~. 

• Not for use with non-dim loads. Works with 120 V~ or 220–277 V~ versions of:

• Lutron in-wall neutral wire dimmers; see approved list in the Dimmers and Switches Specification Guide (Lutron P/N 3671746) at www.lutron.com (see Lighting Load Interfaces section)

• GRAFIK Eye QS control units *

• LP, LCP, and GP dimming panels **

• HomeWorks QS remote power panels **

• HomeWorks QS in-line dimmer

• HomeWorks QS DIN-rail power modules • EcoSystem interface C5-BMJ-XXX†

• Energi Savr Node PRO LED+ phase-adaptive fixture controller

• RadioRA 2 neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369225) at www.lutron.com

• HomeWorks QS neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369305) at www.lutron.com

• Caséta Wireless neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369987) at