Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy in a home or commercial space. They’re ideal for rooms where lights are accidentally left on, such as an office, or rooms that you often enter with your hands full, such as a laundry room or supply closet.

5 AMP version not the low end 2 AMP version seen in big box stores, works with all loads. 

The NEW Maestro PRO dimmer provides an easy-to-operate tap switch that turns lights on/off to your favourite light level. Use the rocker dimmer to adjust lights manually. The delayed fade-to-off feature gives you 10-60 seconds to leave the room. Combine with Maestro companion dimmers to control a single light from up to 10 locations.  Dims any LED lamp, or integrated fixture.  Its considered the swiss army of dimmers.

Maestro C·L PRO DimmerPhase-selectable dimmer for LED, ELV, MLV and Incandescent lamp loads. Features• Large tapswitch with a rocker-style dimmer for a standard designer wallplate opening• Advanced dimming technology designed for compatibility with a broader range of high-efficacy bulbs• UL® Listed to control:– Dimmable LED with integrated driver– Electronic Low-Voltage (ELV)– Magnetic Low-Voltage (MLV)– Dimmable Compact Fluorescent Lamps (CFLs) with integrated ballast– Incandescent and Halogen– Philips Advance Mark 10® ballasts– Hi-lume 1% 2-Wire (LTE) LED Driver• Low-end adjustment to accommodate a wide range of bulbs• Can be used in single-pole or in multi-location (using MA-R) applications• Coordinating Claro and Stainless Steel wallplates available separately• 100% factory-tested

Capable of controlling up to 250 W dimmable LED or 500 W incandescent / Halogen or mixed bulb type per Multigang and Mixed Bulb Type Ratingstable (see page 5)• Capable of controlling up to 500 W of ELV or 400 VA of MLV or up to 20 Hi-lume 1% 2-Wire (LTE) LED drivers• UL® Listed for field interchangeable plastics

PHPM-PA-120WH

Provides dimming control for 1 zone of a full 16 A lighting load.

• May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode. • Phase-adaptive technology automatically selects leading edge or trailing-edge dimming for low-voltage transformers.

• Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module).

• Use PHPM-WBX- models for 3-wire fluorescent dimmer input and PHPM-PA- models for 2-wire input.

• PHPM-WBX- models can be used in conjunction with BCI-0-10 for 0–10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com

• Models available for control voltage of 120 V~ only or 220–277 V~.

• Models available for load voltage of 120 V~ only or 120–277 V~. 

• Not for use with non-dim loads. Works with 120 V~ or 220–277 V~ versions of:

• Lutron in-wall neutral wire dimmers; see approved list in the Dimmers and Switches Specification Guide (Lutron P/N 3671746) at www.lutron.com (see Lighting Load Interfaces section)

• GRAFIK Eye QS control units *

• LP, LCP, and GP dimming panels **

• HomeWorks QS remote power panels **

• HomeWorks QS in-line dimmer

• HomeWorks QS DIN-rail power modules • EcoSystem interface C5-BMJ-XXX†

• Energi Savr Node PRO LED+ phase-adaptive fixture controller

• RadioRA 2 neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369225) at www.lutron.com

• HomeWorks QS neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369305) at www.lutron.com

• Caséta Wireless neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369987) at

Lutron raises the bar once again. 10 years in the making, RadioRA 3 is a new, game-changing system that promises to transform the way your residential clients look at connected lighting control.

Delight your clients. Streamline your projects.

Simply Beautiful

RadioRA 3 brings the contemporary light bar design to a full range of connected residential products — dimmers with capacitive touch technology, switches and keypads. The enhanced functionality and new aesthetic of RA 3 make it easier for your clients to say “yes” to adding lighting control to their home projects.

New Processor.
Easier Installation.

RadioRA 3 has been upgraded with a new all-in-one processor that combines the functionality of the main repeater and connect bridge of RadioRA 2. Powered by PoE, you can install it centrally in the home for optimal RF coverage with no need for a nearby power receptacle.