IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit.

• Indicates presence of voltage from 40-1000VAC
• Visual indication of voltage
• Selectable audible indication of voltage
• Sleek, compact design
• Auto shut-off to conserve battery life
• Green LED shows unit is active, flashing red indicates live voltage
• Low battery detector
• Easy battery replacement
• Batteries included (2 AAA)
• 2-year warranty

B2000 Series Pipe and Conduit Clamps • Safety Factor of 5 • Add PA to suffix for pre-assembled pipe clamps • Includes combination recess hex head machine screw and square nut • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A653 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4, SS6, AL Note: For EMT sizes 21/2” and larger use rigid conduit sizes.

B2000 3/8” (10) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 10 (4.5) B2001 1/2” (15) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 10 (4.5) B2002 3/4” (20) 16 Ga. (1.9) 400 U (1.78) 50 (.22) 50 (.22) 11 (5.0) B2003 1” (25) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 16 (7.2) B2004 11/4” (32) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 19 (8.6) B2005 11/2” (40) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 28 (12.7) B2006 2” (50) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 33 (14.9)

• Bus drop grips are used as cable support.
• They relieve any direct tension from the critical connection and absorb vibration and flexing.
• Bus drop grips are woven of galvanized steel wire.
• They are offered with either the single eye or locking bale attachment.
• Type FC