The sleek and compact design offers a great option for installing a pop-up outlet into a countertop or floor. Pops up while in use and is out of the way and flush with the countertop when pushed down. Available in a variety of finishes including black, stainless, white, and brass.

Features

• Assembly comes with electrical box, outlet and plate assembly
• USB & Single Power 15 AMP
• ETLc Listed

The Compact Pro High Bay by Lithonia Lighting® is the budget-oriented high bay designed for contractors from the ground up. It’s the most compact high bay on the market, making it easier and quicker to install. Built with quality to last and performance to get the job done.

Key Features

• Ultra Compact - Up to 50% smaller than the typical high bay
• Contractor friendly design – up to 30% faster installation and cleanup
• Glare reduction optics featuring WhiteOptics® Technology allowing for maximum light output while reducing glare
• Integrated (Factory Installed) nLight® AIR controls or Field-Installable SensorSwitch™ Twist-to-Lock (TLS) Sensors
• 6kV ANSI Surge, 55°C ambient operation
• >140 Lumens Per Watt
  24,000 lumens 
• 347Volt
• 4100K color temp 
• 98 pieces available while supplies last 

40-80 circuit 

150 AMP

Push On BR Style 

Type CPM/CPL plug-in loadcentres Product description Loadcentres feature factory installed main lugs or main breakers. The BR interiors are manufactured of formed, plated aluminum. Eaton also supplies a full line of Eaton brand BR, DNPL, GFCB and GFEP type branch circuit breakers and accessories for these loadcentres. Product application Designed for the protection and distribution of single and multidwelling residential and light commercial loads to 120/240 volts AC, such as lighting, heating, appliance and small motor branch circuits. All main breaker combination loadcentres are CSAT listed for use as service entrance equipment. Ratings Single-phase, three-wire, 120/240 volts AC and three-phase, four-wire, 120/208 volts AC. Mains through 400 A. Available with up to 84 branch circuits. Main breakers on 150 and 200 A panels are rated at 25,000 AIC. Metal enclosure specifications Enclosures are made of 16 gauge sheet steel, either galvanized or epoxy painted. These coatings provide superior corrosion protection. All trims used on BR loadcentres are chromate sealed and finished with an electro-disposition epoxy paint in grey (ANSI-61) or white, which exceeds requirements for outdoor and indoor applications. A combination surface/flush cover with integral door is supplied with indoor loadcentres rated from 100 through 400 A. All plug-in loadcentres are CSA listed to file LL98266. CSA certified to C22.2 No.29. Warranty 10 year limited.

The selectable light-duty, dimmable, damp-location and DLC® listed CSS LED strip light can easily mount individually to a ceiling, horizontal and vertical wall, or by continuous row. The size and versatility makes it suitable for tight spaces, task lighting, restrooms, under/over cabinet and storage closets. FEATURES: ¡ Inspired by classic fluorescent strip channels, this LED fixture offers a traditional appearance that incorporates the latest technology ¡ Quick and simple to install with the snap-lock tool-less channel cover ¡ Features a low-glare diffuse FLAT lens for enhanced aesthetic!

4'

Wattage: 28,36,44

Voltage: 120-277

Color Temp: 35K/40K/50K

Lumens: 3200-5100



8'

Wattage: 55,72,88

Voltage: 120-277

Color Temp: 35K/40K/50K

Lumens: 6500-10,000

• Overhead/Underground • Tunnel lug kit supplied for overhead service LK250, LK500, LK750 upon request • Line side - double 1/2" studs to accommodate compression lugs for underground service (1 x 500 MCM or 2 x 250 MCM) Load side - one #4 - 600 MCM or two 1/0 - 250 MCM tunnel type connectors Neutral - 1/2" studs to accept two 500 MCM compression type lugs - lugs, one#4 - 600 MCM or two 1/0 - 250 MCM • Dimensions, 30" x 20" x 8" or 36" x 20" x 8" Weight, 75 lbs. or 80 lbs. Ko's 3" - 31/2", 4" • CSA approved

JS4A

TCC5

TSU

Connect Trac

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.

The design has no visible screws and lets you add a personal touch by adding wall paper, paint or fabric under the cover.