eaton

100AMP Panel Package Promo with Surge Protection! Quick shop
100AMP Panel Package Promo with Surge Protection!
100AMP Panel Package Promo with Surge Protection!
100AMP Panel Package Promo with Surge Protection!
eaton

100AMP Panel Package Promo with Surge Protection!

$599.00 $740.00

CPM130 Panel Package 

This package features a 100 amp, 30 circuit Eaton panel with 20 breakers (10-BR115, 3-BR215, 1-BR240, 1-BR230) 8- Arc Faults and 1- 10kA surge protector.  

The surge breaker is designed to provide complete home surge protection for sensitive electronics and appliances from the damaging effects of surges. This 2-pole surge breaker takes 2 spots in the panel and protects a complete home.

Despite the following statistics, surge protection is one of the most overlooked safeguards....when installing a panel for your home or office.

An estimated $250 to $500 million dollars refrigerators with touchscreens, computerized per year is lost from property damage caused washers, dryers, ranges and HVAC equipment, yet by severe weather, lightning, electrostatic discharge, let them operate largely unprotected from surge. switching of inductive or capacitive loads and
internal/external switching transients.*

  • Approximately 60 to 80% of all transient voltage surges are generated from inside a home or building; Only 35% of transient voltage surges stem from
    an outside source.**

  • Analysts estimate U.S. consumers spend billions annually on “smart” home appliances,

• 84% of homeowners feel power strips provide adequate protection for computers, HD TVs and other electronic components. Only 20% of these same homeowners understand that these strips degrade over time, rendering them inadequate for surge protection.***

 

View product
400A CSA Approved Service Entrance Rated Automatic Transfer Switch Quick shop
400A CSA Approved Service Entrance Rated Automatic Transfer Switch
eaton

400A CSA Approved Service Entrance Rated Automatic Transfer Switch

$660.00

Designed and Built in Canada, for Canada!

Eaton is pleased to announce the release of an expanded offering in our service entrance rated residential transfer switches for our Standby Generators! These NEW products add to Eaton’s comprehensive line of residential transfer switches.  With the electrical contractor and homeowner in mind, Eaton has designed and manufactured an ALL IN ONE solution to meet CEC requirements for complete home Standby Generator backup.

Introducing the industry first 400 amp service entrance rated automatic transfer switch, featuring LED position indicators, (EGSCA) advance load management, and engine start options.

View product
400AMP Panel Package Promo with Surge Protection Quick shop
400AMP Panel Package Promo with Surge Protection
400AMP Panel Package Promo with Surge Protection
400AMP Panel Package Promo with Surge Protection
eaton

400AMP Panel Package Promo with Surge Protection

$1,999.00 $2,500.00

CPM442 Panel Package 
This package features a 400 amp, 42 circuit Eaton panel with 20 breakers (10-BR115, 3-BR215, 1-BR240, 1-BR230) 10- Arc Faults and 1- 200kA surge protector.  

Despite the following statistics, surge protection is one of the most overlooked safeguards....when installing a panel for your home or office.

An estimated $250 to $500 million dollars refrigerators with touchscreens, computerized per year is lost from property damage caused washers, dryers, ranges and HVAC equipment, yet by severe weather, lightning, electrostatic discharge, let them operate largely unprotected from surge. switching of inductive or capacitive loads and
internal/external switching transients.*

  • Approximately 60 to 80% of all transient voltage surges are generated from inside a home or building; Only 35% of transient voltage surges stem from
    an outside source.**

  • Analysts estimate U.S. consumers spend billions annually on “smart” home appliances,

• 84% of homeowners feel power strips provide adequate protection for computers, HD TVs and other electronic components. Only 20% of these same homeowners understand that these strips degrade over time, rendering them inadequate for surge protection.***

The wired-in surge protection device brick design is ideal for areas where space is a major consideration. The surge unit can be mounted directly to the panel through a chase nipple connection which will reduce lead length and impedance while increasing protection levels.
The 100kA product features a NEMA 4X housing and a 200kA SCCR rating. The SpikeShield wired-in surge protective devices are UL1449 4th edition listed.
• 100,000 Peak Amperage Capacity
• Can be mounted directly to the panel through a chase nipple connection to reduce lead length and impedance.

Max. Surge Current per Phase: 100kA

Max. Operating Temperature: -40ºF to 140ºF (-40ºC to 60ºC)

Diagnostics Indicators: Green Status LED’s, Audible Alarm, Dry Contacts

Dimensions: 9.9"W x 4.8"H x 3.1"D

Weight: 4.78 lbs.

Terminal Accommodation: #10 AWG 18.0" Wire Leads

Frequency: 50/60 Hz

EMI/RFI: Up to -30dB

Housing Rating: Type 4X

Listing: cULus UL 1449 4th edition type 2 SPD, UL1283 (Wye prod. only), CSA C22.2 NO. 8-M1986

View product
60 Circuit Panel Package Promo With Surge Protection! Quick shop
60 Circuit Panel Package Promo With Surge Protection!
60 Circuit Panel Package Promo With Surge Protection!
60 Circuit Panel Package Promo With Surge Protection!
eaton

60 Circuit Panel Package Promo With Surge Protection!

$850.00 $1,100.00

CPM260 Panel Package 

This package features a 200 amp, 60 circuit Eaton panel with 20 breakers (10-BR115, 3-BR215, 1-BR240, 1-BR230) 9- Arc Faults and 1- 200kA surge protector.  

Despite the following statistics, surge protection is one of the most overlooked safeguards....when installing a panel for your home or office.

An estimated $250 to $500 million dollars refrigerators with touchscreens, computerized per year is lost from property damage caused washers, dryers, ranges and HVAC equipment, yet by severe weather, lightning, electrostatic discharge, let them operate largely unprotected from surge. switching of inductive or capacitive loads and
internal/external switching transients.*

  • Approximately 60 to 80% of all transient voltage surges are generated from inside a home or building; Only 35% of transient voltage surges stem from
    an outside source.**

  • Analysts estimate U.S. consumers spend billions annually on “smart” home appliances,

• 84% of homeowners feel power strips provide adequate protection for computers, HD TVs and other electronic components. Only 20% of these same homeowners understand that these strips degrade over time, rendering them inadequate for surge protection.***

The wired-in surge protection device brick design is ideal for areas where space is a major consideration. The surge unit can be mounted directly to the panel through a chase nipple connection which will reduce lead length and impedance while increasing protection levels.

The 100kA product features a NEMA 4X housing and a 200kA SCCR rating. The SpikeShield wired-in surge protective devices are UL1449 4th edition listed.

• 100,000 Peak Amperage Capacity

• Can be mounted directly to the panel through a chase nipple connection to reduce lead length and impedance.

Max. Surge Current per Phase: 100kA

Max. Operating Temperature: -40ºF to 140ºF (-40ºC to 60ºC)

Diagnostics Indicators: Green Status LED’s, Audible Alarm, Dry Contacts

Dimensions: 9.9"W x 4.8"H x 3.1"D

Weight: 4.78 lbs.

Terminal Accommodation: #10 AWG 18.0" Wire Leads

Frequency: 50/60 Hz

EMI/RFI: Up to -30dB

Housing Rating: Type 4X

Listing: cULus UL 1449 4th edition type 2 SPD, UL1283 (Wye prod. only), CSA C22.2 NO. 8-M1986

View product
Air cooled standby generator 14KW Kit Kohler Quick shop
Air cooled standby generator 14KW Kit Kohler
Air cooled standby generator 14KW Kit Kohler
Air cooled standby generator 14KW Kit Kohler
Air cooled standby generator 14KW Kit Kohler
eaton

Air cooled standby generator 14KW Kit Kohler

$5,799.00 $6,299.00

Kohler standby generators make it easy, affordable and worry-free, to supply reliable backup power for residential and light commercial applications. Whether you are home or away, they quietly protect your home and family, with an immediate, automatic, and reliable response to utility power failure, so power is never lost.

Kit Includes:

(1) 14 KW Kohler Generator 

(1) Battery

(1) Battery & Oil Warmer

(1) 100 ATS with SE Rated Disconnect 

(1) Start up with OnCue Software for remote monitoring Within GTA  

Overview

Popular generators for backup power, with an automatic transfer switch included. When you lose power during an outage or storm, a hard-working 14 kW KOHLER® generator keeps your appliances working, the heat or AC running and your security system on.*

  • Reliable.
    Every KOHLER® generator is equipped with a heavy-duty, commercial-grade engine that stands up to extreme weather.
  • Powerful.
    In just 10 seconds, your KOHLER generator automatically restores power to a 5-ton (60,000 BTU) air condition, major appliances and electronics.*
  • Premium warranty.
    We've got you covered with 5-year, 2,000-hour protection, and a corrosion-proof enclosure that's built to last.
  • Award winner.
    KOHLER generators have received several awards, including the Most Valuable Product (MVP) Award 2010 by Building Products magazine.

THE POWER YOU NEED

  • PowerBoost™ technology provides power to start large loads such as central air conditioners without dropping power to other appliances
  • Extraordinary peak motor-starting capacity: 14RESAL at 35kVA at 240V
  • Premium power quality delivers exceptional digital voltage and frequency regulation along with low levels of harmonic distortion to protect sophisticated electronics
  • Powered by reliable KOHLER Command PRO® engine, designed and tested for tough commercial applications; with hydraulic valve lifters to eliminate need for lengthy break-in periods and expensive valve adjustments; operation speed is 3600 rpm (the standard for air-cooled generators)
  • Compatible with optional OnCue® Plus and OnCue® Plus Wireless Generator Management Systems, and Programmable Interface Module (PIM)
  • Also compatible with Load Control Module (LCM) or Load Shed kit with single-phase generators only

THE CONVENIENCES YOU EXPECT

  • Comes with either an RXT 100-amp indoor-rated automatic transfer switch with 16-circuit load center or an RXT 200-amp outdoor-rated standard automatic transfer switch
  • DC2 controller designed for today's sophisticated electronics manages both the generator set and Model RXT transfer switch functions
  • Quiet, neighborhood-friendly operation with sound levels similar to a typical central air conditioner
  • Stylish corrosion-proof enclosure impact tested to -30°F
  • Runs on either natural gas or liquid propane (LPG) with simple switching between natural gas and LPG in the field
  • Streamlined installation, simple terminal block for easy field connections. Kohler also offers concrete mounting pads to lower installation costs and time.
  • Model 14RESAL approved for off-grid applications with 18-month/1000-hour off-grid warranty

 

View product
BR Surge Breaker Quick shop
BR Surge Breaker
eaton

BR Surge Breaker

$204.41

BR Type 

Surge 

Eaton

The surge breaker is designed to provide complete home surge protection for sensitive electronics and appliances from the damaging effects of surges. In addition to surge protection, the surge breaker is a functional 2-pole thermal magnetic breaker providing protection for overloads and short circuits. The combination of circuit protection and surge protection provides flexibility and space savings in the loadcenter.

View product
Canadian Service Entrance Rated ATS Quick shop
Canadian Service Entrance Rated ATS
Canadian Service Entrance Rated ATS
Canadian Service Entrance Rated ATS
eaton

Canadian Service Entrance Rated ATS

$995.00

Service Disconnect and ATS in One!

Our Service Entrance (SE) Rated switches combine the SE Disconnect and Automatic Transfer Switch (ATS) in one convenient enclosure.

They also feature LED position indicators for source availability, engine start signal and load management* capability!

 

EGSC100ASE

120/240

Whole House or Essential Loads

100

2

50/60

Yes

10,000

Mechanically Held Contactor

Type 3R (outdoor)

Basic (relay)

 

EGSC200ASE

120/240

Whole House or Essential Loads

200

2

50/60

Yes

10,000

Mechanically Held Contactor

Type 3R (outdoor)

Basic (relay)

View product
Complete Home Surge Protection Quick shop
Complete Home Surge Protection
eaton

Complete Home Surge Protection

$189.00 $199.00

Complete Home Surge Protection Type 2 Devices (CHSPT2 Series) protect your home electronics from the damaging effects of electrical surges. They provide premium surge protection for AC power and cable at the point of entrance to the home. Protection at this location can reduce surges entering the home to an acceptable level for your home electronics and appliances.
  • Industry’s most complete line of products means there is no need to search elsewhere for all the necessary components
  •  Surge (20 kA protection) 
  • Quick connect design allows easy mounting of cable protection modules
  • Clear, visible LED indication displays protective status of device
  • Offer a Limited Product Warranty and the industry’s best Connected Equipment Warranty (up to 75K)
View product
Eaton Generator Replacement Key Quick shop
Eaton Generator Replacement Key
eaton

Eaton Generator Replacement Key

$99.00

View product
Eaton Metered, Service Entrance Rated Automatic Transfer Switch Quick shop
Eaton Metered, Service Entrance Rated Automatic Transfer Switch
Eaton Metered, Service Entrance Rated Automatic Transfer Switch
Eaton Metered, Service Entrance Rated Automatic Transfer Switch
Eaton Metered, Service Entrance Rated Automatic Transfer Switch
eaton

Eaton Metered, Service Entrance Rated Automatic Transfer Switch

$2,651.00

Features/benefits

  • Combined functionality in a single enclosure

  • Saves installation time and cost

  • Service entranced approved for Canada

  • 100 and 200A Models

  • Overhead or Underground service entrance

  • Type 3R indoor/outdoor enclosure

  • Accessory 15A Single Pole Circuit Breaker

    Applications

  • New or retrofit residential standby generator installa- tions

  • Farm or rural properties

    Everything in one box

    Traditionally, retrofitting a home to permit the connec- tion of a standby generator has meant considerable rework to the home’s electrical infrastructure. Often times this leads to the addition of multiple electrical enclosures and a network of conduit and cabling tying them together. The added complication of multiple enclosures increases the labour costs on installations. It also leaves the home owner with either a cluttered utility room or a less than attractive exterior installation. To solve some of these issues Eaton has developed its new metered, service entrance rated automatic trans- fer switch (ATS).

    Combined in a single enclosure and factory wired is
    a 200A meter socket, service entrance rated circuit breaker disconnect, and an ATS. The single enclosure assembly saves the installing contractor time and money while leaving the home owner with a more visu- ally appealing installation on the outside of their home.

  • Factory wired

  1. A traditional service entrance rated assembly would require the installation of a separately mounted meter socket, enclosed circuit breaker or fusible disconnect switch, and an ATS. Eaton provides all three devices
    in the one enclosure and factory wires them to carry the utility supply from the meter socket through to the ATS contactor assembly.

3R rated

Type 3R enclosure is construct- ed for either indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts; to provide a degree of protection
of the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); to provide a degree of protection with respect to harmful effects on the equipment due to the

ingress of water (rain, sleet, snow); and that will be undam- aged by the external formation of ice on the enclosure. 

Overhead/Underground Entrance

Two openings on the top of the enclosure provide for overhead service entrance hub mounting. Knockouts in the bottom of the enclosure and matching left and right hand wireways provide for bottom service entrance cabling. The unused wireway(s) can be removed providing additional space in the enclosure. Blanking plates are included to cover

the openings left behind by the removal of either wireway.

View product
Eaton W.P Disconnects Quick shop
Eaton W.P Disconnects
eaton

Eaton W.P Disconnects

$73.00

3 ph 3 w 600Vac, 30A, 60A, non-fusible motor disconnect  600Vac @ 65KA rms short circuit rating when protected by J fusing. Applies to ‘B’ series, effective March 2011, non ‘B’ series rated 10KA  600V unit complies with CEC rule 28-602(3)(b) and are labelled “suitable for motor disconnect.” cCSAus approved  For ease of wiring, din rail mounted removable 600V disconnect  Versatile cable entry - bottom, sides or bac
View product
Manual Transfer Switch Quick shop

Eaton

Manual Transfer Switch

$599.00 $630.00

Manual Transfer Switch
Eaton

Manual Transfer Switch

$599.00 $630.00

Used to manually transfer a load from one power source to an alternate source, or to connect a single source of power to either of two different loads.

Double throw switches are not approved for service entrance in Canada, per CEC and C22.2 No.4.

Product Description

  •   100A

  •   Horsepower rated

  •   600 Vac, 250 Vdc

    maximum

  •   3 pole designs

  •   Enclosures type 1

  •   non-fusible

    switches are 100% load break and 100% load make rated

View product
Quick shop
eaton

Panel & Breaker Accessories

$0.70

BRFP Filler

BR Lock

EZ Kit

Eaton

View product
Panel Inserts & Doors Quick shop
Panel Inserts & Doors
eaton

Panel Inserts & Doors

$48.24

Type CQLP & QLPT
View product
Quick shop
eaton

Power Line Panel Boards

$241.63

Power Line Panels Eaton

Panel Boards powerline

225 AMP

400 AMP

Type P1AL4A2 & P2AL4A2

View product