Stanpro

7" LED MOTION SENSOR EDGELIT Quick shop
7" LED MOTION SENSOR EDGELIT
Stanpro

7" LED MOTION SENSOR EDGELIT

$35.00

The LED edge-lit ceiling luminaire with integrated motion sensor has a sleek design including an embedded PIR (Passive Infrared) sensor. This luminaire helps save energy by automatically turning on when motion is detected and off when there is no motion. It can be easily installed, with a twist-lock installation, flush to a wall or ceiling. Offered in white, it will fit any type of application from a kitchen pantry, a closet, a laundry room, an attic or even a hallway. • Construction Finish − Housing material: Plastic − White finish − Frosted lens − Available size: 7" Mounting − Surface mounted − Easy twist-lock installation, no visible screws •

Technical specifications − Sensor Type : PIR − Automatic ON/OFF – no wall switch required − 120 VAC − Color temperature : 3 000K, 4 000 K − Estimated lifespan of 50 000 hours to L70 − CRI 80+ − Suitable for Damp Location − Operation temperature : -30°C to +45°C (-22°F to +113°F)

View product
Basket Quick shop

Stanpro

Basket

from $129.00

Basket
Stanpro

Basket

$129.00

L3CBA GEN. 2

LED RECESSED CENTER BASKET

3 CCT AND 3 POWER SELECTABLE 1'X4', 2'X2', 2'X4'

L3CBA offers a classic look with all the necessary features to make it the perfect product for your commercial lighting applications. With its 120-347 V and its 3 CCT and 3 power selectable features, it makes it the simple choice for all projects. This energy efficient center basket has a long life for optimal performance and is ideal for all commercial and industrial buildings.

View product
Edge-lit 7” with motion sensor Quick shop
Edge-lit 7” with motion sensor
Stanpro

Edge-lit 7” with motion sensor

$35.00

The LED edge-lit ceiling luminaire with integrated motion sensor has a sleek design including an embedded PIR (Passive Infrared) sensor. This luminaire helps save energy by automatically turning on when motion is detected and off when there is no motion.
In addition, it can be easily installed, with a twist-lock installation, flush to a wall or ceiling. Offered in white, it will fit any type of application from a kitchen pantry, a closet, a laundry room, an attic or even a hallway.

View product
F54T5HO Lamps Quick shop
F54T5HO Lamps
Stanpro

F54T5HO Lamps

$4.50

F54T5HO- 840K Cool White
View product
Flat Slim Light Quick shop
Flat Slim Light
Flat Slim Light
Flat Slim Light
Flat Slim Light
Flat Slim Light
Stanpro

Flat Slim Light

$9.95 $28.99

Please note while slims are cost effective these are high in glare and carry blue light.  If looking for a healthy alternative please check out the Ovid lighting line with 95 CRI for no blue light and no glare ideal for families with kids under 12 for eye health or those prone to migraines. 

Lithonia LED flat downlight provides an cost effective, easy and quick downlight solution without the traditional frame and reflector.  Perfect for installation in existing showers and closets to low ceiling basements applications with the benefits of energy saving LED technology.

4" design with an impressive 700 lumens and 90CRI for true healthy color rendering. Round version now with selectable 3000K,4000K and 5000K and matte white finish. Square version are 3000K only with semi baffle design.

Features

1. Flange: aluminum, painted white.

2. Lens: diffuser is used for smooth and diffused light pattern.

3. Junction Box: steel, 4 78" x 1 14" x 4 18" Clip attached on the side of the J-box to connect with fixture or new construction plate to meet NEC (National Electric Code). J-box also has key holes on the side for mounting on joist

4. Connector: locking power connection is used to connect J-box and fixture. Standard length of the connection is 16" (400mm).

5. Ceiling cutout: installation template on adhesive backed label is supplied with the product.  4" round: 4 316" (106mm) diameter.

6. Gasket: foam gasket supplied with fixture.

7. Please note not ideal for soffits, as the lights shines out not down.  Ideal for basements and showers.

View product
Hexagon LED Quick shop

Stanpro

Hexagon LED

from $3,500.00

Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Hexagon LED
Stanpro

Hexagon LED

$3,500.00

The KOLIKA luminaires offer a sleek and lightweight design, making it the perfect choice for creating a modern atmosphere in any office, commercial or retail space. The fixtures are available in black and white with the versatility to change color temperature using a simple switch and corner connector accessories which simplify lighting set ups in a wide range of shapes and configurations.

Construction Housing:

The body is made of extruded aluminum Finishes Matte white and matte black Lens Opal acrylic

Color CCT Selectabale 

Installation Suspended installation 10' suspended aviation cable, 10' power cord and one canopy are included

Row mounting A joiner accessory is sold separately and provides a continuous mount with seamless lighting.

Illuminated corner connectors Ready-to install L, T, X, Y and 120-degree corner connectors simplifies installation for various design patterns.

Specifications Driver 120-277 V electronic driver with 0-10 V dimming standard.

Lumens 25% of lumens delivered uplight 75% of lumens delivered downlight

Beam angle − 2': V: 88°/ H: 96° − 4': V: 108°/ H: 105° − 8': V: 108°/ H: 105° Ambient temperature − -20°C to 40°C / -4°F to 104°F

Compliances − DLC Listed −cULus − ICES-005 for Class A products

Suitable for damp locations 

View product
LED COB Tape Light Quick shop
LED COB Tape Light
LED COB Tape Light
LED COB Tape Light
LED COB Tape Light
LED COB Tape Light
Stanpro

LED COB Tape Light

$9.00

Reel Length - ft (m): 16.4 (5)
Colour Temperature (K): 3000K or 4000K
Volts (V DC): 24V DC
Watts per foot (W/ft): 1.7
Watts per meter (W/m): 5.5
Lumens per foot: 166
IP Rating: 65
Average Life (Hours): 50000
Colour Rendering Index (CRI): 90+
Warranty (yrs): 3
Brand: Stanpro
View product
LED Corn Cobs 347V Quick shop
LED Corn Cobs 347V
Stanpro

LED Corn Cobs 347V

$237.00

Convert metal-halide (MH) and other high-intensity discharge (HID) fixtures into long-lasting, energy-efficient LED fixtures with Standard’s new CCT and Power Selectable 360⁰ High Intensity LED lamps.

These high energy efficient and performant LED lamps are a simple and economic retrofit solution for applications such as high-bays, post tops and bollards. They can replace up to 600W HID!

The 18/27/36 W lamp is also compatible with a plug-and-play external photocell or motion sensor available for additional lighting control

View product
LED FILAMENT Quick shop

Stanpro

LED FILAMENT

from $35.00

LED FILAMENT
LED FILAMENT
LED FILAMENT
LED FILAMENT
Stanpro

LED FILAMENT

$35.00

Standard’s High Intensity LED Filament Lamps are the perfect energy efficient replacement for high-intensity discharge (HID) lamps. The high output filament design allows for a perfect retrofit solution to reduce the light depreciation over time and provide longer lifespan. They are ideal for giving ambient yet impactful lighting in parks, streets, warehouses, and more.
View product
LED Vapour Tight NOW with Selectable Colors Quick shop
LED Vapour Tight NOW with Selectable Colors
LED Vapour Tight NOW with Selectable Colors
LED Vapour Tight NOW with Selectable Colors
stanpro

LED Vapour Tight NOW with Selectable Colors

$95.00


The CSVT™ by Lithonia Lighting ® is built on the technological framework of the CSS, providing greater customization and performance for everyday spaces. And with the ability to switch lumens and adjust color temperature in one fixture, the CSVT can easily be adapted to the needs of each project – 9 different variations within the same SKU!
INTENDED USE — Ideal for damp/wet locations such as outdoor venues, canopies and locker rooms. Not
for use or installation in direct outdoor sunlight. Must be installed under canopy or covered ceiling. For
direct sunlight installations, please refer to the FEX product family. Certain airborne contaminants
can diminish integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate
Compatibility table for suitable uses.
Certain airborne contaminants may adversely affect the functioning of LEDs and other electronic
components, depending on various factors such as concentrations of the contaminants, ventilation, and
temperature at the end-user location. Click here for a list of substances that may not be suitable
for interaction with LEDs and other electronic components.
CONSTRUCTION
- Light Gray Polycarbonate housing
- Frosted Polycarbonate lens
- Poured in place polyurethane gasket
- Polycarbonate Latches, optional stainless steel latches available.
- Standard 1/2" wet location fitting
ELECTRICAL
- High Efficiency LEDs meet DLC Standard
- MVOLT (120-277V) & 347V
- 0-10V Dimming standard
Luminaire Surge Protection Level: Designed to withstand up to 2.5kV/0.75kA per ANSI C82.77-5-2015.
For applications requiring higher level of protection additional surge protection must be provided.
INSTALLATION
- Surface (wall, ceiling) using standard brackets
- Suspended (chain, cable) using standard brackets
LISTINGS
- CSA Certified to UL & C-UL Standards for wet location
- IP65, IP66 rated per IEC60529
- FCC Title 47, Part 15 Subpart B compliant
- 2.5kV/0.75kA Surge Rated per ANSI C82-77-5-2015
- CSA Ambient Listings on Page 3
- Lumen Maintenance Listed on Page 3
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions
are qualified.
WARRANTY — 5-year limited warranty.

View product
LED Wall Pack Quick shop
LED Wall Pack
LED Wall Pack
LED Wall Pack
Stanpro

LED Wall Pack

$55.00

Order Code: 68988
Previous Generation: 68312
International Article Number (EAN/UPC): 69549023130
Description: WCI-LS2B-W-3C-BR-P
LED Wall Packs 20W 2560-2921LM 120-277V 3000K/4000/5000K

Colour Rendering Index (CRI): 80
Volts (V): 120-277
Colour Temperature (K): 3 000/4 000/5 000
DLC: Yes
Environment: Wet
Lumens: 2560
IP Rating: 65
Housing Finish: Bronze
Photocell: Yes
Life (Hours): 54000
Lumens Per Watt: 135
Warranty (yrs): 5
Watts (W): 20
View product
Metal Halide Lamps & Ballast Quick shop
Metal Halide Lamps & Ballast
Metal Halide Lamps & Ballast
Metal Halide Lamps & Ballast
Stanpro

Metal Halide Lamps & Ballast

$22.50

View product
MULTI-MOUNT EDGELIT Quick shop

Stanpro

MULTI-MOUNT EDGELIT

$125.00 $149.00

MULTI-MOUNT EDGELIT
MULTI-MOUNT EDGELIT
MULTI-MOUNT EDGELIT
Stanpro

MULTI-MOUNT EDGELIT

$125.00 $149.00

With a minimalist look in either white or black finish, our Multi-Mount EDGELIT is a versatile solution that blends modern simplicity with well thought-out features. Our luminaire offers the advantage of an integrated 3 color temperature selection as well as different mounting options. Enjoy this luminaire flush mounted (standard) or, semi-flush and pendant when used with our compatible stem kit. Our Multi-Mount EDGELIT is an ideal lighting solution for both commercial and decorative residential applications such as kitchens, living rooms, offices and more!

INCLUDES 4.4FT STEM SUSP. KIT FOR CLEG16

Available in white and Black

View product
NEW Aluminum Extrusions Black with Smoked Lens Quick shop
NEW Aluminum Extrusions Black with Smoked Lens
NEW Aluminum Extrusions Black with Smoked Lens
NEW Aluminum Extrusions Black with Smoked Lens
Stanpro

NEW Aluminum Extrusions Black with Smoked Lens

$14.00

LOW VOLTAGE TAPE SYSTEMS EXTRUSIONS, LENSES & END CAPS Mounting accessories STANPRO'S LED extrusions are used as channels for LED tape light. Our range of LED extrusions can be surfaced, recessed, suspended and used in a variety of indoor and outdoor applications. They can be combined with a variety of optical lenses, mounting brackets and LED tapes to help design any LED lighting application. The aluminum extrusion is designed to function as a heat sink, helping in the management of heat dissipation in LED tapes. 

View product
SWIVEL CHOICE SERIES Contractor Promo Quick shop
SWIVEL CHOICE SERIES Contractor Promo
SWIVEL CHOICE SERIES Contractor Promo
SWIVEL CHOICE SERIES Contractor Promo
Stanpro

SWIVEL CHOICE SERIES Contractor Promo

$15.00 $18.00

The LED SWIVEL Choice downlight has been specially designed to highlight specific zones by offering 360° rotation with a 90° tilt. Featuring great performance and quality with a CRI of 90+, this 4″ directional downlight is easy to install in any type of ceiling. The LED SWIVEL Choice downlight is a cost-effective solution for all residential applications.

WHITE

CCT Select 

WHILE SUPPLIES LAST

View product
T-GRID LED LINEAR LIGHT Quick shop
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
T-GRID LED LINEAR LIGHT
Stanpro

T-GRID LED LINEAR LIGHT

$119.00 $222.00


FEATURES
The L3CTG is 4' which can be compatible to 15/16" standard suspended ceilings system. This product offers lighting designers more freedom to design since the LED module can follow the ceiling elements in many different ways. It is suitable for commercial and architectural environments that require a unique and elegant lighting design

 

  • 68028 - L3CTG-0415LS2/3500K - specify if 4000K
  • 68030 -PSTG60W - Power Supply Required (powers up to 3 lights)

 

View product
T8 Lamps Quick shop

Stanpro

T8 Lamps

from $5.00

T8 Lamps
Stanpro

T8 Lamps

$5.00

Color 840K
View product
Traditional Led Wallpack Quick shop
Traditional Led Wallpack
Traditional Led Wallpack
Traditional Led Wallpack
Traditional Led Wallpack
stanpro

Traditional Led Wallpack

$135.00

The classic TWR1 and TWR2 LED glass wall packs come with adjustable light output (ALO) technology. TWR LED dials in to desired output to match the needs of any job site, and saves significant energy costs when replacing traditional metal halide sources.
Its energy-efficient LEDs have an expected service life of more than 20 years, which eliminates frequent lamp and ballast replacements associated with traditional technologies. Cost effective, flexible, and always in stock - TWR LED is the choice for distributors and contractors alike.

 120V-347V

TWR1 - Adjustable lumens from 1,100 to 6,200 lumens (9W to 51W)

TWR2 - Adjustable lumens from 3,050 to 11,800 lumens (21W to 87W)

View product
WPA Wall Pack Quick shop
WPA Wall Pack
Stanpro

WPA Wall Pack

$106.00

Order Code: 68722
Previous Generation: 65570
International Article Number (EAN/UPC): 69549018730
Description: WPA-LS1B-W-3C-BR-P 120-277V 2262LM 3C WP
WPA-LS1B-W-3C-BR-P 120-277V 2262LM 3000/4000/5000K BRONZE WALL PACK

Colour Rendering Index (CRI): 70
Volts (V): 120-277
Wallpack Type: Wall Pack Square
Colour Temperature (K): 3 000/4 000/5 000
DLC: Yes
Environment: Wet
Lumens: 2261
IP Rating: 65
Housing Finish: Bronze
Photocell: Yes
Lumens Per Watt: 113
Warranty (yrs): 5
Watts (W): 20
View product