Quick shop
$17.99
One size c/w screw
A great time and money saver in overhead installation - replaces bottom reducers and SXC series meter socket hubs Will accommodate 11/4" and 2"
Quick shop
Quick shop
$506.00
MCC Series
CSA enclosure 3R • 1/2" Studs on line side • Conductor range load size No. 6-1/0 AWG • Compression studs on line side • For underground use only • Prebussed from main lugs to each position
Quick shop
Quick shop
$75.00
Quick shop
$2.69
Medium base, phenolic, pullchain, 4 terminals with tri-drive screws, fits 3 1/4 and 4'' boxes, with cage necks.
S759W-CD-SP Cooper Cross
Quick shop
$2.35
Medium base, phenolic, one-piece keyless, 4 terminals with tri-drive screws, fits 3 1/4'' and 4'' boxes, with cage neck.
S1174WSP Cooper cross
Quick shop
$3.84
4867Y
CC Commercial Grade Plug 15amp Yellow
4887Y
Quick shop
$134.52
54 sq ft membrane for Nuheat warm flooring.
Nuheat Membrane is a tile underlayment and uncoupling membrane.
Nuheat Membrane can replace a second layer of plywood/concrete board and reduces the risk of tile cracks caused by movement in the flooring assembly. When integrated with Nuheat Cable, the Nuheat Membrane system is a best-in-class integrated uncoupling, waterproofing, and floor heating solution. Nuheat Membrane eases the installation of Nuheat Cable by simplifying the installation process.
Quick shop
Quick shop
Quick shop
Quick shop
$3,900.00
Features/benefits
Combined functionality in a single enclosure
Saves installation time and cost
Service entranced approved for Canada
100 and 200A Models
Overhead or Underground service entrance
Type 3R indoor/outdoor enclosure
Accessory 15A Single Pole Circuit Breaker
Applications
New or retrofit residential standby generator installations
Farm or rural properties
Everything in one box
Traditionally, retrofitting a home to permit the connec- tion of a standby generator has meant considerable rework to the home’s electrical infrastructure. Often times this leads to the addition of multiple electrical enclosures and a network of conduit and cabling tying them together. The added complication of multiple enclosures increases the labour costs on installations. It also leaves the home owner with either a cluttered utility room or a less than attractive exterior installation. To solve some of these issues Eaton has developed its new metered, service entrance rated automatic trans- fer switch (ATS).
Combined in a single enclosure and factory wired is
a 200A meter socket, service entrance rated circuit breaker disconnect, and an ATS. The single enclosure assembly saves the installing contractor time and money while leaving the home owner with a more visu- ally appealing installation on the outside of their home.
Factory wired
A traditional service entrance rated assembly would require the installation of a separately mounted meter socket, enclosed circuit breaker or fusible disconnect switch, and an ATS. Eaton provides all three devices
in the one enclosure and factory wires them to carry the utility supply from the meter socket through to the ATS contactor assembly.
3R rated
Type 3R enclosure is construct- ed for either indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts; to provide a degree of protection
of the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); to provide a degree of protection with respect to harmful effects on the equipment due to the
ingress of water (rain, sleet, snow); and that will be undam- aged by the external formation of ice on the enclosure.
Overhead/Underground Entrance
Two openings on the top of the enclosure provide for overhead service entrance hub mounting. Knockouts in the bottom of the enclosure and matching left and right hand wireways provide for bottom service entrance cabling. The unused wireway(s) can be removed providing additional space in the enclosure. Blanking plates are included to cover the openings left behind by the removal of either wireway.
Allow 3-4 weeks, please note while it is CSA, please check with your hydro company as not every area allows these.
Quick shop
$350.00
Quick shop
$70.00
This MicroLED light provides high quality LED illumination, with efficient accent lighting for commercial and residential decors. Ideal for surface and recessed mounting applications. Powered by 24Vconstant voltage power supply (sold
separately)
Quick shop
$100.00
Quick shop
$1,500.00
MILL is a high-performance fixture with a simple shape punctuated by its repeated acoustic felt panels. With its four different diameters, four different lengths and two mounting options, this fixture is versatile to suite various needs and spaces.
Catalogue # 4578-09-QS10-LED LO-35-90-120V-DV-PGF -WH
Quick shop
$125.00
This small spotlight is delivered with a bracket and ground stake. This makes the fixture suitable for mounting on, for example, a fence or in an overhang, and to illuminate plants and shrubs in the border.
Quick shop
$135.00
This small but powerful ceiling spot is specially designed for outdoor use, such as in an overhang or pergola.
A MINI SCOPE CEILING every 1 to 1½ meters
Quick shop
$223.00
Our small MINI SCOPE spotlight remains the most versatile spotlight in our range because, in addition to being used as a spotlight and wall light, there is now also a stand-mounted version available. The MINI SCOPE DUO includes 2 MINI SCOPE (2 x 2 watt) spotlights on a (separable) stand, making this fixture ideal for use, for example, in a border. The spotlights can be easily positioned and aimed from anywhere on the stand allowing this fixture to illuminate both high and low plants. A ground stake and several cable clamps to guide the cables from the spotlights are included.
