The LED edge-lit ceiling luminaire with integrated motion sensor has a sleek design including an embedded PIR (Passive Infrared) sensor. This luminaire helps save energy by automatically turning on when motion is detected and off when there is no motion.
In addition, it can be easily installed, with a twist-lock installation, flush to a wall or ceiling. Offered in white, it will fit any type of application from a kitchen pantry, a closet, a laundry room, an attic or even a hallway.

• Single or double-sided signs
• Top, side or back mounting
• Standard and arrow panels included
• Panel rotates 0° to 180°
• Quick installation

CSA enclosure 3R • Barrel type connectors angled at 45° • Conductor range No. 6 -250 MCM CU/AL • Lay-in neutral (can be used with unbroken neutral wire)

SUB LM2

J22

BS2-TCV

BQ2

The Eco series is a 24V dimmable electronic LED hardwire box. All encased in a coated aluminum box that includes 6 knockouts to enable easy installation.

Entry level non programable floor hearing stat. 

• Change the direction of a run of EMT conduit with this EMT 45° or 90° Elbow. It is designed with a large radius for easy wire pulling. It is made of galvanized steel for corrosion resistance.
  • Enables a 45° or 90° change of direction in a run of EMT conduit
  • Corrosion-resistant galvanized steel
  • Large radius allows for easy wire pulling
  • UL and CSA listed
  • Usable indoors and outdoors
  
  
  
  

• The EMT Set Screw Connectors are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
  • Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
  • May be used indoors and in concrete-tight applications when taped
  • Body and locknut made with die-cast zinc alloy
  • Set screw made with zinc-plated steel
  • Tri-Drive screw head design for use with Phillips, slotted and square screwdrivers
  • Screw thread is designed to not vibrate loose
  • Reversible locknut designed to cut through protective coatings on boxes and enclosures
  • CSA and UL listed for safety

• Use the Type LB Set Screw Conduit Body to access a raceway interior for wire pulling, splicing or maintenance when working with EMT. Its copper-free, aluminum construction resists corrosion. Use indoor our outdoor.
  • Grants access to the interior of a raceway for wire pulling, splicing and maintenance
  • Copper-free, die-cast aluminum resists corrosion
  • Use with EMT conduit
  • UL and CSA safety listings
  • For indoor or outdoor application
  • Includes cover and gasket
  
  

• The EMT 1-Hole Straps secure EMT conduit to wood, masonry or other surfaces that require increased load bearing. The straps are made of zinc-plated steel and designed for indoor or outdoor use. Strap positively snaps on the conduit when installed.

  • Secures EMT conduit to surfaces for greater load bearing
  • Zinc-plated steel resists corrosion
  • Suitable for indoor or outdoor use
  • UL and CSA listed for safety and peace of mind

  • PRICES PER 100 PCS

• The EMT Set Screw Connectors are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
  • Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
  • May be used indoors and in concrete-tight applications when taped
  • Body and locknut made with die-cast zinc alloy
  • Set screw made with zinc-plated steel
  • Tri-Drive screw head design for use with Phillips, slotted and square screwdrivers
  • Screw thread is designed to not vibrate loose
  • Reversible locknut designed to cut through protective coatings on boxes and enclosures
  • CSA and UL listed for safety

• With the EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This steel coupling is concrete-tight when taped. These couplings meet UL and CSA requirements.
  • Joins 2 lengths of EMT together
  • Made of steel electro-plated with zinc
  • UL and CSA listed
  • Concrete-tight when taped
  
  

EVERVOLT™ HOME ENERGY STORAGE SYSTEM

Optimize your solar investment and create a more
resilient energy future. With EverVolt you can store
your excess solar power for when you need it most
or sell your surplus energy back to your local utility.

What is EverVolt™?

•AC or DC coupled for new and existing solar systems

•11.4 or 17.1 kWh of energy storage –scalable to 102 kWh per home

•Lithium-ion battery technology using Panasonic’s 18650 battery cell used in many electric vehicles

•5.5 kW / 23A of continuous backup power per EverVolt

•Intelligent software to maximize your ROI

•Unique features including generator integration, high reliability, recyclability and faster availability shipping within 30 days. 

Pricing Includes:

Freight to Destination

EverVoltSystem: Inverter, Battery Modules, Enclosure, Hardware Kit, App

When to choose a DC System?

New PV systems

When to choose a AC system?

Existing PV system with inverters that are under warranty and prefer to use AC modules. 

DC System Sizing 

PV array sizing is governed by the inverter PV input

•1 x EverVolt = 6.5 kW DC

•2 x EverVolt = 13 kW DC

•3 x EverVolt = 19.5 kW DC

•Stacking systems to increase backed up load capability

•2 x EverVolt = 9 kW / 46A

•3 x EverVolt = 13 kW / 69A

Generator Integration 

An external generator can be used to power backed up loads when batteries reach 10% SoC

•Generator auto-start capability for electric start models

•Compatible with generators that deliver clean 240 VAC at 60 Hz. Single-phase and three-phase generators are not compatible.

•Generator sizing

•Should be sized to provide enough power and current for all loads.

•Minimum recommended size is 7.5 kW.

What can I backup during a power outage with oneEverVolt system?

•Refrigerator

•Lights

•Garage door

•Internet

•Cell phones / tablets / computers

•Coffee maker

What can I backup during a power outage with 2-3EverVolt systems?

Basic loads as per above plus:

•Small A/C units

•Small well / pool pumps

•Electric Vehicles (low charge setting)

•Additional heating elements (electric stove, toaster, espresso machine, etc.)

Other costs such as 3rd party electrician Installation Costs to be aware of (supplied by other) in addition to solar and batteries:

•Permitting and plans set: $700-1000

•Additional Materials e.g. Essential loads panel, conduit, cabling: $600

•Installation 1 day for two people: $1500

•Total: $3,100

•Additional costs can include: length of wire run, hidden conduit, difficult in pulling loads to backed up loads panel

Protects children: patented shutter system helps prevent improper insertion of foreign objects.

24-Hour/365 Day 1-Circuit Electronic Control, 120-277 VAC, SPST, Outdoor Metal Enclosure