Tamper-Resistant Floor Box Assembly - One Gang for Wood Sub-Floors, Nickel

FB1TRDRNPass and Seymour

Tamper-Resistant Floor Box Assembly, #8 duplex opening. Two threaded screw plugs,Includes 3232 15A, 125A tamper-resistant receptacle. Brass.

Fein’s battery set have been upgraded to 6AH

• Brushless FEIN PowerDrive motor with 30% greater efficiency and longer service life.
• 4-speed solid metal gearbox. Optimum speeds for drilling in metal and driving self-drilling screws.
• QuickIN accessory interface for all QuickIN accessories. Fast change between applications.
• Flexibility with the FEIN MultiVolt interface. Tool can be used with all FEIN Li-ion batteries (12-18 V).
• High torques up to 354 [40] in/lbs[Nm].
• Optimal speed (2,500 rpm) in 4th gear for up to 1/4 [6] in[mm] dia.
• Mechanical torque setting.
• Compact and lightweight construction.
• 550 screw applications (3/16 x 1-9/16 [5 x 40] in[mm] in wood) with one battery charge (3 Ah).
• Includes QuickIN solid metal drill chuck (1,062 [120] in/lbs[Nm]) with carbide jaws and high clamping force.
• One charger for all voltage classes of FEIN Li-ion batteries.
• The battery capacity can be read directly on the battery.
• FEIN SafetyCell technology. Protects the battery and the machine from overloading, overheating and deep discharge.

2-speed cordless drill/driver with brushless motor and QuickIN interface. Ideal for drilling up to 3/8 [10] in[mm] in metal, stone and masonry.

Smaller and lighter 4-speed cordless drill/driver with brushless motor and QuickIN interface. Ideal for universal drilling and bolt tightening up to 5/16[8] in[mm].

UL Spill Water Protection – Meets or exceeds UL 111 - Outline of Investigation for Multioutlet Assemblies. Eliminates risk of shock or short circuiting due to moisture entering device. Black

4” Fire-Rated Gimbal LED Downlight New Construction

Product Features
Dedicated small aperture 4” LED fire-rated downlight solution with accent light engine trim module
Patent pending integrated low smoke intumescent barrier
• Eliminates the need for installers to build additional boxes around fixtures to meet fire ratings
• Provides protection against the spread of heat and flames into the ceiling cavity for 1 hour or 2 hour fire ratings
• Reduces sound transmission between floors Easy installation and servicability
• Low profile integrated LED downlight less than 6” in height • Easy to handle compact size weighing only 4 lbs
• Installs into wood joists with Real Nail® 3 bar hangers
Applications
• Residential and commercial applications including multi-family, hotels, assisted living, dormitories and other multi-level construction
• Shallow plenum, new construction
• IC rated - for direct contact with insulation
Fire Resistance Specifications:
• Conforms to UL263, ASTM STD E119 and CAN/ULC-S101 for US and Canadian installations
• May be used in fire resistance floor-ceiling and roof-ceiling designs per UL Fire Classified Directories CDHW and CDHW7
• 1 hour fire rated floor/ceiling and roof/ceiling gypsum assembly per UL Design No. L500 & P500
• 2 hour fire rated floor/ceiling gypsum assembly per UL Design No. L500, L505, L511, L536, L538, L541, L556, L577, M5

Fit Fixture, Dome, 16", Black finish, Pendant, 1*E26 base, . Lamp not included

Fixed, double-sided, door knob set.

Solid cross-knurled metal.

Fixed, single-sided, door knob

with spun metal plate on the

reverse side.

Solid cross-knurled metal.

The cleverest way to add power and style, the Pop-Out Outlet extends to offer 3-plug access, then uniquely disappears back into the wall with a simple push when not in use. Made exclusively for use with screwless Wall Plates from the adorne® Collection.

Please note while slims are cost effective these are high in glare and carry blue light.  If looking for a healthy alternative please check out the Ovid lighting line with 95 CRI for no blue light and no glare ideal for families with kids under 12 for eye health or those prone to migraines. 

Lithonia LED flat downlight provides an cost effective, easy and quick downlight solution without the traditional frame and reflector.  Perfect for installation in existing showers and closets to low ceiling basements applications with the benefits of energy saving LED technology.

4" design with an impressive 700 lumens and 90CRI for true healthy color rendering. Round version now with selectable 3000K,4000K and 5000K and matte white finish. Square version are 3000K only with semi baffle design.

Features

1. Flange: aluminum, painted white.

2. Lens: diffuser is used for smooth and diffused light pattern.

3. Junction Box: steel, 4 7⁄8" x 1 1⁄4" x 4 1⁄8" Clip attached on the side of the J-box to connect with fixture or new construction plate to meet NEC (National Electric Code). J-box also has key holes on the side for mounting on joist

4. Connector: locking power connection is used to connect J-box and fixture. Standard length of the connection is 16" (400mm).

5. Ceiling cutout: installation template on adhesive backed label is supplied with the product.  4" round: 4 3⁄16" (106mm) diameter.

6. Gasket: foam gasket supplied with fixture.

7. Please note not ideal for soffits, as the lights shines out not down.  Ideal for basements and showers.